POCKET AMP BASS
Portable Bass Preamp
$219.99
Backordered – More on the Way!
Product information "POCKET AMP BASS"
Providing extensive sound shaping options for active and passive bass guitars, the Pocket Bass Amp is a multi-purpose effects pedal and preamp that‘s perfect for gigging, recording and practising. It features clean, overdrive and fuzz modes with adjustable drive and saturation, a 3-band EQ with semi-parametric mid control that is specifically tuned for bass guitar and vintage or modern cabinet simulation. A blend control allows you to mix the direct and effected signals.
The Pocket Bass Amp provides an insert for external effects, 3.5 mm stereo line input and headphones output for quiet play-along practice and a footswitch-assignable thru jack for silent tuning. Enabling DI applications, the balanced XLR output is pre or post effect switchable. The Pocket Bass Amp requires a 9 volt battery or power adapter and comes in a rugged diecast enclosure with heavy duty long-life footswitch, convenient LED status indicators and ground lift.
| Technology: | solid state |
|---|---|
| Input impedance: | 39.37 in |
| Controls: | Pre/Post, Bass, mute, Mode, mid frequency, volume, Drive, input pad, highs, ground lift, Mid |
| Output connectors: | 3.5 mm jack, XLR, 2 x 6.3 mm TS |
| FX loop: | Yes |
| Indicators: | on/off, Signal, peak |
| Width: | 3.94 in |
| Power supply: | 9 V DC power supply, 9 V block |
| Inputs: | 2 |
| Product type: | Guitar Amplifiers |
| Channels: | 1 |
| Number of outputs: | 4 |
| Cabinet material: | Die-cast aluminium |
| Height: | 2.17 in |
| Output impedance: | TRS 10000, XLR 510 |
| Input connectors: | 6.3 mm jack |
| Depth: | 3.94 in |
Login
accessories
This patch cable, available in different versions, is ideal for space-saving connection of effects on the pedalboard due to its extra flat 6.3 mm angle jack plugs with gold-plated tip. The ultra-flexible, flat cable with fine-stranded 0.16 mm² inner conductor and very low capacitance, ensures detailed, colouration-free signal transmission over the entire frequency range. Mercilessly save space on the permanently installed board!
This patch cable, available in different versions, is ideal for space-saving connection of effects on the pedalboard due to its extra flat 6.3 mm angle jack plugs with gold-plated tip. The ultra-flexible, flat cable with fine-stranded 0.16 mm² inner conductor and very low capacitance, ensures detailed, colouration-free signal transmission over the entire frequency range. Mercilessly save space on the permanently installed board!
For professional applications on stage, in the studio or in the rehearsal room, excellent quality is available with our 5 STAR SERIES. This cable is made in the EU and therefore meets the relevant requirements for professional use.Durability and reliability find their master in the hard road everyday life! We have therefore developed a cable that is not only flexible, but also very robust. We use a special soft-PVC compound for all cables of the 5 STAR SERIES, which is friction resistant and bendable. For excellent signal transmission, but is also more abrasion resistance. The cable comes with a cable tie and two transparent, loose heatshrinks for labeling.Engineered in Germany & Made in EU: This stands for precision & quality.
The PWT 04 is a universal pedalboard power supply with 1,000 mA output capacity and 4 standard centre negative 9 V DC single isolated outputs. Featuring short circuit and overload protection, the PWT 04 is fully regulated to deliver constant voltage. The unit sports a power on LED, and comes with a set of DC cables and dedicated mains adapter.
This patch cable, available in different versions, is ideal for space-saving connection of effects on the pedalboard due to its extra flat 6.3 mm angle jack plugs with gold-plated tip. The ultra-flexible, flat cable with fine-stranded 0.16 mm² inner conductor and very low capacitance, ensures detailed, colouration-free signal transmission over the entire frequency range. Mercilessly save space on the permanently installed board!
The PWT 12 is a heavy duty (2000 mA) universal pedal board power supply with 12 single-isolated 9 V DC, centre-negative female pin-connector outputs. The variable outputs enable the simulation of voltage drop or 'battery sag' in old batteries. The power supply is regulated for constant voltage supply and protected against short circuit and overloading. The PWT 12 is equipped with a power LED and a two-colour LED output status indicator. It is supplied with an AC adapter and a set of DC cables. The PWT 12 is the ideal solution for power-hungry foot pedals or 9-volt effects units that can be operated at higher voltages for increased dynamics and stability.
With a stable 250 mA on each of the five center negative barrel style outlets the compact Palmer PWT 05 MKII is most suited to virtually any pedalboard size. To deliver clean DC power to your pedals and eliminate ground loops between them and the associated hum the outlets are single isolated.The PWT 05 MKII is protected against overloading and comes with 25 and 50 cm long connection cables, as well as two Y-cables. The first one, with a black connector, connects two 9 V outputs to increase the current intensity to a massive 500 mA, the other one, with a white connector, connects two 9 V outputs to double the voltage to 18 V. Also included is a 1-into-5 daisy chain that lets you power five pedals from one output if their total current draw does not exceed 250 mA. The rugged enclosure of the Palmer PWT 05 MKII provides mounting and cable relief options while the IEC mains inlet and voltage selector enable worldwide use.
Superior quality on a high performance levelThis "Adam Hall Cables" 5 STAR product is a professional cable which delivers outstanding sound quality for the most demanding players.With musicians in mind who are seeking the full sound spectrum of their beloved instruments, our crew at Palmer® developed this super low restistance and low capacitance cable, and a braided shielding to avoid magnetic interferences to nearly 100%. The result of this Adam Hall Cables X Palmer® cooperation is an unaltered and balanced sound!In order to reach the superior quality, we only assemble original Neutrik® connectors with gold plated contacts. Palmer® products as well as Adam Hall Cables are engineered in Germany.