POCKET AMP ACOUSTIC
Portable Preamp for Acoustic String Instruments
$229.99
Backordered – More on the Way!
Product information "POCKET AMP ACOUSTIC"
Providing extensive sound shaping options for acoustic guitars and basses, the Acoustic Pocket Amp is a versatile preamp that‘s perfect for gigging, recording and practising. It accomodates both piezo and magnetic pickups, and the 3-band EQ with semi-parametric mid control is specifically tuned for acoustic instruments. The Pocket Preamp features an input limiter to prevent transient distortion while a 5-position rotary notch filter eliminates resonant frequency feedback. A mode switch selects between crisp contemporary or warm vintage sound characteristics, and a blend control allows you to mix the direct and processed signals.
The Acoustic Pocket Amp provides an insert for external effects, 3.5 mm stereo line input, headphones output and a footswitch-assignable thru jack to connect a tuner. Enabling DI applications, the balanced XLR output is pre or post signal processing switchable. The Acoustic Pocket Amp requires a 9 volt battery or power adapter and comes in a rugged diecast enclosure with heavy duty long-life footswitch, convenient LED status indicators and ground lift.
| Output connectors: | 6.3 mm jack |
|---|---|
| Input impedance: | 39.37 in |
| Type: | Preamp |
| Controls: | Footswitch, Notch, Bass, Gain, Mode, Di, mid frequency, volume, Style, Blend, highs, Mid |
| Indicators: | on/off, Signal, peak |
| Width: | 3.94 in |
| Power supply: | 9 V DC power supply, 9 V block |
| Inputs: | 2 |
| Output impedance: | 100 Ohm (XLR) / (TRS) - 500 |
| Product type: | Guitar Effects |
| Height: | 2.17 in |
| Features: | FX loop |
| Outputs: | 4 |
| Cabinet material: | Die-cast aluminium |
| Input connectors: | 6.3 mm jack |
| Depth: | 3.94 in |
Login
accessories
This patch cable, available in different versions, is ideal for space-saving connection of effects on the pedalboard due to its extra flat 6.3 mm angle jack plugs with gold-plated tip. The ultra-flexible, flat cable with fine-stranded 0.16 mm² inner conductor and very low capacitance, ensures detailed, colouration-free signal transmission over the entire frequency range. Mercilessly save space on the permanently installed board!
The PWT 04 is a universal pedalboard power supply with 1,000 mA output capacity and 4 standard centre negative 9 V DC single isolated outputs. Featuring short circuit and overload protection, the PWT 04 is fully regulated to deliver constant voltage. The unit sports a power on LED, and comes with a set of DC cables and dedicated mains adapter.
This patch cable, available in different versions, is ideal for space-saving connection of effects on the pedalboard due to its extra flat 6.3 mm angle jack plugs with gold-plated tip. The ultra-flexible, flat cable with fine-stranded 0.16 mm² inner conductor and very low capacitance, ensures detailed, colouration-free signal transmission over the entire frequency range. Mercilessly save space on the permanently installed board!
This patch cable, available in different versions, is ideal for space-saving connection of effects on the pedalboard due to its extra flat 6.3 mm angle jack plugs with gold-plated tip. The ultra-flexible, flat cable with fine-stranded 0.16 mm² inner conductor and very low capacitance, ensures detailed, colouration-free signal transmission over the entire frequency range. Mercilessly save space on the permanently installed board!
The PWT 12 is a heavy duty (2000 mA) universal pedal board power supply with 12 single-isolated 9 V DC, centre-negative female pin-connector outputs. The variable outputs enable the simulation of voltage drop or 'battery sag' in old batteries. The power supply is regulated for constant voltage supply and protected against short circuit and overloading. The PWT 12 is equipped with a power LED and a two-colour LED output status indicator. It is supplied with an AC adapter and a set of DC cables. The PWT 12 is the ideal solution for power-hungry foot pedals or 9-volt effects units that can be operated at higher voltages for increased dynamics and stability.
With a stable 250 mA on each of the five center negative barrel style outlets the compact Palmer PWT 05 MKII is most suited to virtually any pedalboard size. To deliver clean DC power to your pedals and eliminate ground loops between them and the associated hum the outlets are single isolated.The PWT 05 MKII is protected against overloading and comes with 25 and 50 cm long connection cables, as well as two Y-cables. The first one, with a black connector, connects two 9 V outputs to increase the current intensity to a massive 500 mA, the other one, with a white connector, connects two 9 V outputs to double the voltage to 18 V. Also included is a 1-into-5 daisy chain that lets you power five pedals from one output if their total current draw does not exceed 250 mA. The rugged enclosure of the Palmer PWT 05 MKII provides mounting and cable relief options while the IEC mains inlet and voltage selector enable worldwide use.