PWT 12 IEC
Universal Pedalboard Power Supply with USB
$199.99
Backordered – More on the Way!
Product information "PWT 12 IEC"
Leave the noise behind
A pedalboard can be a noisy place, and choosing the right power supply can make a big difference to the noise level and clarity of your guitar tone. That's where the PWT 12 IEC comes in. With 12 high current, individually isolated, ultra low noise outputs - each with its own dedicated regulator and custom isolated transformer - the PWT 12 IEC represents the next generation of Palmer® isolated pedal power supplies. Featuring two variable voltage outputs, the PWT 12 IEC lets you adjust the voltage between 6 and 18 volts, giving you even more headroom to run your overdrive pedals, as well as the "dying battery" sound that many guitarists love.In addition, the Palmer PWT 12 IEC has a USB C and USB A output with 18W so you can charge your mobile devices or even power your MIDI keyboards. We designed the PWT 12 IEC to address guitarists' main pain points when it comes to powering their precious effects pedals, so you can perform with complete peace of mind, knowing that your pedals and rig will sound as good as they can.
| Max. Power consumption: | 54 W |
|---|---|
| Accessories: | Mains cable, 15x DC cable (30 / 60 / 90 cm), 4x rubber feet |
| Product type: | Power Supplies |
| Controls: | Mains switch, output voltage selector and switch |
| Polarity: | Center negative |
| Noise: | < 40 µV (output 1 - 12) |
| Indicators: | Power |
| Width: | 6.61 in |
| Max. Output power: | 36 W |
| non-isolated DC output: | 9 V (2000 mA max) |
| Height: | 1.65 in |
| Depth: | 3.66 in |
| USB-C / USB-A output power: | 18 W max. |
| Output 7-10: | 9 V (250 mA max) |
| Output voltage: | 6 V - 18 V |
| single isolated DC outputs: | 12 |
| Input voltage: | AC 100 - 240 V |
| Output 1-2: | 6 - 18 V (250 mA max) |
| Output 11-12: | 9 V (500 mA max) |
| Output connectors: | 2.1 x 5.5 mm |
| Output 3-6: | 9 V (100 mA max) |
| Ambient temperature (in operation): | 0 - 40 °C |
| Individually isolated outputs: | Yes |
| Relative Humidity: | < 80 % ( non-condensing ) |
Login
accessories
Universal aluminium Pedalboard for the storage of all commercially available floor effects. The cross bars as well as the height and the tilt of the Pedalboard can be individually adjusted. The cross bars are already covered with Velcro (fleece), a sufficient amount of hook strap is also included. Power supplies and similar peripheral devices can be mounted below the board. For this the Pedalboard features 4 practical hooks on the underside. 2 Elastic bands are supplied - making fixation easy!This set also features a high-quality padded softcase with an accessory compartment and a shoulder strap.
Universal aluminium Pedalboard for the storage of all commercially available floor effects. The cross bars as well as the height and the tilt of the Pedalboard can be individually adjusted. The cross bars are already covered with Velcro (fleece), a sufficient amount of hook strap is also included. Power supplies and similar peripheral devices can be mounted below the board. For this the Pedalboard features 4 practical hooks on the underside. 2 Elastic bands are supplied - making fixation easy!This set also features a high-quality padded softcase with an accessory compartment and a shoulder strap.
In its new incarnation, the Palmer Pocket Amp MK 2 delivers an extended range of authentic tube amplifier tones from high headroom ultra clean to maxed out high gain distortion. With 3-position selector switches for amplifier design, gain structure and loudspeaker miking simulation the MK 2's hot rodded circuitry lets you easily configure vintage and modern sounds as well as your own while high performance op amps provide superior S/N ratio. For even more flexibility the Pocket Amp MK 2 sports master controls for drive and output level plus a 2-band EQ that has been carefully tailored for guitar applications.Featuring a durable die cast aluminium enclosure with balanced XLR and unbalanced 6.35 mm outputs in addition to 3.5 mm AUX input and headphones jacks the Palmer Pocket Amp MK 2 is more than just the go-to tool for direct recording. It doubles as a practice amp, overdrive and distortion pedal, standard guitar DI box when bypassed and replaces your stage amp when used with a sound and monitor system. The Pocket Amp MK 2 works on a 9V battery or optional power adapter, e.g. Palmer PW9V.
The PWT 04 is a universal pedalboard power supply with 1,000 mA output capacity and 4 standard centre negative 9 V DC single isolated outputs. Featuring short circuit and overload protection, the PWT 04 is fully regulated to deliver constant voltage. The unit sports a power on LED, and comes with a set of DC cables and dedicated mains adapter.