TMS 4321 OH B

The GMSCLMP 25 is compatible with most handheld dynamic microphones and acommodates shaft diameters from 24 to 35 mm. The unbreakable clip holds your mic firmly in place and swivels to aim it as needed. The Gravity microphone clip includes a 3/8" adapter.

The MA GOOSE XL is a highly flexible yet rigid 15 mm diameter gooseneck with 3/8" male and female threaded ends that holds weight easily while maintaining its bending radius.

The MA GOOSE M is a flexible but exceptionally sturdy 15 mm-thick gooseneck with 3/8-inch interior thread and screw end that can maintain almost any bend even under stress.

The MS QC 1 B is a coupler for rapid and effortless mic clip and boom arm mounting. The clever two-piece construction of black powder coated aluminium and steel features a 5/8" female thread stem that attaches to the mic stand and a 3/8" male thread crown that attaches to mic clips or boom arm hubs. The smart groove and ball plus hex lock design ensures solid coupling and perfect alignment. The MS QC 1 B Quick Coupler includes a dual thread adapter to provide universal compatibility with all mic stands, clips and boom arms.

This microphone clip acommodates most handheld wireless microphones with shaft diameters ranging from 34 to 42 mm. Made of unbreakable high-quality elastic material, it firmly holds your mic and tilts for perfect positioning. The clip has a standard 5/8" female thread and includes a 3/8" adapter to fit all mic stands and boom arms.

The MA GOOSE L is a flexible but exceptionally sturdy 15 mm-thick gooseneck with 3/8-inch interior thread and screw end that can maintain almost any bend even under stress.

Made of black powder coated steel, the Gravity MAMH 01 clamps on to microphone or music stand poles with up to 30 mm diameter. It features a permanently attached 3/8" mic clip mount screw (mic clip not included).

The MA GOOSE S is a flexible but exceptionally sturdy 15 mm-thick gooseneck with 3/8-inch interior thread and screw end that can maintain almost any bend even under stress.

This drink holder features a unique screw clamp that is adjustable for vertical or horizontal mounting options. It fits on mic stands, speaker stands and music stands with tubing diameters up to 35 mm as well as table tops and securely holds bottles, cans, cups and glasses with a maximum diameter of 90 mm.

To make sure your pop filter successfully filters undesired pop noises and clipping, you need to be able to position it perfectly in front of your mouth. This is simple with the Gravity MA POP 1 pop filter, with its large screen diameter, double nylon mesh and VARI®-ARM.The VARI®-ARM allows you to position the pop filter precisely where it will work best, and then fix into position so that it won't shift.All joints can be moved using only one single adjustment screw. Once the desired position has been achieved, you simply tighten the screw to fix the whole VARI®-ARM. This way, your pop filter won't slip out of position while you're sitting at your desk creating a podcast or standing in the studio booth recording vocals.The solid clamp fits on any microphone stand, on the edge of a table or any other surface you want to attach it within the clamping range of 15 mm to 35 mm.

Show starts in an hour, people are waiting, you are setting the stage and you feel the pressure because you just can't find that right clamp. The search is over!With the MS U CLMP you have a clamp that fits any microphone.It's clamping range of 14-42 mm will hold any microphone in your collection, both round or conical. It will also make sure not to scratch your microphones due to the EVA padded grip.With a Gravity MS U CLMP, you have an all-purpose solution for attaching any hand-held microphone.

Traveler Series' Drumstick HolderEvery bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on finding the right tool available at the concert venue.The Gravity® MA DSB 01 drumstick holder can be taken everywhere you go. It's so light, there's absolutely no need for you to worry about how much it weighs or about having space for it.It can be quickly and easily attached to your drum hardware using the clamping arm. Thanks to the large clamping range spanning from 15 to 35 mm and the 360° rotation and 180° tilt options, the basket can be adjusted for the best accessibility. Your sticks can then be kept within grabbing distance so you can quickly pull out the right one while playing your songs.Gravity® has once again delivered a small, useful and reliable product for you to round off your collection of stands.

Multi-purpose, easy to use and compact.Sometimes it's the little things that make a big difference in a setup.The Gravity® MS QT 2B Quick-Tilt Camera Adapter gives you that benefit.The small, versatile ball joint can be rotated by 360° and tilted by 90° with the fixed guidance groove.So you can easily shoot video from above, position your handheld mobile recorder or simply change the camera angle on the fly.The bottom has a 3/8" female thread, which is also equipped with a 1/4" male thread for total flexibility, so the MS QT 2B Quick-Tilt Camera Adapter can be mounted on microphone stands and camera tripods.With the Gravity® camera ball head, you are perfectly equipped for your photo and video setup.

Every bit of weight counts when you're travelling by plane or truck from one gig to the next. You also can't always rely on the next concert venue having all the tools you need for the show. Thankfully, you can always take the Gravity GS MS 08 with you on your travels: it's so light and space-saving that you don't have to worry about weight or storage space!The GS MS 08 is a universal hanger for acoustic guitars, electric guitars and basses. It can be mounted on any tripod stand/pole which has a diameter of 15-35mm, and its self-adjusting holder accommodates any headstock size and shape. The GS MS 08 is coated with a specially formulated rubber that provides a secure hold for the instrument, yet does not mar the finish.*Not recommended for guitars with a nitro lacquer finish.

Multi-purpose, easy to use and compact - sometimes it's the little things that make a big difference in a setup. The Gravity® MS QT CAM 1B Quick-Tilt Camera Adapter gives you that benefit.The small, versatile ball joint can be rotated by 360° and tilted by 90° with the fixed guidance groove.So you can easily shoot video from above, position your handheld mobile recorder or simply change the camera angle on the fly.The bottom has a 3/8" female thread, which is also equipped with a 1/4" male thread for total flexibility, so the MS QT CAM 1B Quick-Tilt Camera Adapter can be mounted on microphone stands and camera tripods.The integrated mounting plate makes it easy to attach your equipment and also offers a rubberised surface to prevent scratches on the underside of your equipment.With the Gravity® camera ball head, you are perfectly equipped for your photo, video and recording setup.

Featuring a 3/8" male thread the MS QC 1 TB attaches to the Gravity quick coupler stem. The groove and ball locking mechanism makes swapping mic clips, microphones and booms a breeze. The quick coupler crown includes a 5/8" adapter for compatibility with all mic clips and boom arms.

The Gravity Stereo Bar 01 allows you to mount two microphones on a single microphone stand with 3/8" thread. Made of solid aluminium, it is the perfect choice for basic stereo micing and features two 3/8" sliding microphone mounts which permit 60 - 170 mm spacing centre to centre.

The Traveler Series' Pop Filter with 3D ArmEvery bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on the concert venue having the right tool available for you when needed.The Pop Filter with 3D Arm MA 3D A POP 1 can be taken everywhere you go. It's so light and space-saving, there's absolutely no need for you to worry about weight or storage space.With this tool you can enhance your voice- and vocal recordings by placing the high-quality pop filter, with double nylon mesh and a large screen diameter of 15.7 cm between you and your microphone. This way you avoid unwanted pop noises and clipping.Its fastening mechanism is quick and easy to assemble. The large clamping range from 15 to 35 mm lets you mount it on all popular microphone stands, and the three joints' 360° rotation options allow you to install it as you like. Simply loosen, adjust and tighten the wing-screws. Voila - you're all done! Once set, the MA 3D A POP 1 stays locked in place.Gravity® has once again delivered a small, useful and reliable product for you to round off your collection of stands.

The Traveler Series' 3D ArmEvery bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on the concert venue having the right tool available for you when needed.The Gravity® 3D Arm MA 3DA can be taken everywhere you go. It's so light and space-saving, there's absolutely no need for you to worry about weight or storage space.This tool lets you attach microphones, action cams and mobile phone holders to your microphone stand, for example, and set them up flexibly. Its fastening mechanism is quick and easy to assemble. The large clamping range from 15 to 35 mm and the three joints' 360° rotation options allow you to install it as you like. Simply loosen, adjust and tighten the wing-screws. Voila - you're all done!Gravity® has once again delivered a small, useful and reliable product for you to round off your collection of stands.

In the past, if you wanted to produce music, videos or other content professionally, you had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums are recorded either at home or spontaneously on the road. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.With the VARI®-ARM L 38, Gravity® has created such an universal tool that allows you to use a wide variety of equipment - from a microphone clamp to a tablet or an action cam - almost anywhere and in any direction in a matter of seconds.The VARI®-ARM L 38 is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position.Its main feature:Only one adjusting screw is needed to lock and unlock all three joints. As soon as you have found your desired position, you tighten the locking screw and the position of the VARI®-ARM L 38 is held tight and safe. The included adapter (3/8" to 1/4" reduction thread) gives you complete flexibility, allowing you to use almost any camera, handheld recorder or smartphone mount on the market with the VARI®- ARM L 38.Thanks to the solid clamp at the bottom of the VARI®-ARM and its large clamping range from 15 to 35 mm, the VARI®-ARM can also be easily attached to most tables and poles (e.g. to tripods). As a universal tool for your creative purposes, there are hardly any limits to the VARI®-ARM L 38's usability.

This drink holder features a unique screw clamp that is adjustable for vertical or horizontal mounting options. It fits on mic stands, speaker stands and music stands with tubing diameters up to 35 mm as well as table tops and securely holds bottles, cans, cups and glasses with a maximum diameter of 70 mm.

Traveler Series' Tiltable TrayEvery bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on finding the right tool available at the concert venue.The Gravity® MA TRAY 3 can be taken everywhere you go. It's so light and space-saving, there's absolutely no need for you to worry about how much it weighs or about having space for it.You can place items on it such as your guitar picks, your smartphone or your drink, and attach it using the clamping arm. If you want to attach it on inclined bars, such as to the Gravity VARI®-G multiple guitar stand series, you can gradually tilt the tray by 180° as to keep it straight at all times.Gravity® has once again delivered a small, useful and reliable product for you to round off your collection of stands.

The Gravity Quick Tilt mic adapter features a ball joint and guide slot for 90° maximum tilt. The mic stand end has a 3/8" female thread and oversized set screw that facilitate 360° rotation and locking the adapter in place, the 3/8" mic end sports an aluminium retainer ring. The all-metal GMSQT 1 B is ideal for rock-solid, precision positioning of microphones, portable digital audio recorders or cameras. It includes a 3/8" to ¼" adapter and works with any standard mic clip, shock mount or stereo bar.

Enabling accurate and easily repeatable two-microphone stereo recording arrays, the Gravity Stereo Bar is a real precision instrument. It allows for exact spacing of the sliding microphone mounts from 6 to 29 cm, +/- 90° microphone orientation on the horizontal axis and +/- 90° tilt of the entire bar. Easy-to-read spacing and angle markings facilitate fast and precise positioning, taking notes of your settings and recreating them without effort. Set screws with ergonomic soft-touch knobs securely lock the adjustable parts in the desired position.The Gravity Stereo Mic Bar is suitable for common stereo recording techniques including ORTF, DIN, XY and AB patterns and mounts on any mic stand. It is engineered from strong yet lightweight aluminum and easily able to support two large diaphragm microphones.

In the past, if you wanted to produce music, videos or other content professionally, you had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums are recorded either at home or spontaneously on the road. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.With the VARI®-ARM M 38, Gravity® has created such an universal tool that allows you to use a wide variety of equipment – from a microphone clamp to a tablet or an action cam – almost anywhere and in any direction in a matter of seconds.The VARI®-ARM M 38 is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position. Its main feature: Only one adjusting screw is needed to lock and unlock all three joints. As soon as you have found your desired position, you tighten the locking screw, and the position of the VARI®-ARM M 38 is held tight and safe. Thanks to the 3-kilogram load capacity, you can even mount a DSLM camera, including a standard lens, or a heavyweight microphone such as the broadcast classic RE-20.There is a 3/8" thread at the head of the VARI®-ARM for you to screw on a microphone clip, a pop filter and more. The included adapter (3/8" to 1/4" reduction thread) gives you complete flexibility, allowing you to use almost any camera, handheld recorder or smartphone mount on the market with the VARI®- ARM M 38. Thanks to the solid clamp at the bottom of the VARI®-ARM and its large clamping range from 15 to 35 mm, the VARI®-ARM can also be easily attached to most tables and poles (e.g. to tripods). As a universal tool for your creative purposes, there are hardly any limits to the VARI®-ARM M 38's usability.