Skip to main content Skip to search Skip to main navigation

Product information "MON 8 A G3"

The MON 8 A G3 is part of an entirely newly developed family of powered stage monitors for high performance. The MON G3 Series incorporates the advanced technology and premium materials found in high-end monitors typically rented by professionals, making this quality available to everyone. These include, for example, advanced coaxial loudspeakers with integrated 50° x 90° CD horn, which ensure the acoustic ideal of a true point source and thus outstanding audio characteristics even at short listening distances. Besides this, the series offers a high-level of robustness, a comprehensive set of features and the elegant LD Systems design.

As the smallest member of the new stage monitor family, the MON 8 A G3 is particularly inconspicuous and flexible in use: as a stage monitor, in a DJ setup or on a speaker stand as a FOH speaker, as a satellite in 2.1 systems or as a delay line speaker. At the same time, the MON 8 A G3 offers a frequency response of up to 59 Hz, which is unusually low for its size, and thus full-range sound.

Both the signal (XLR/jack combo) and the power connection (PowerCON compatible) can be looped through. This allows for elegant, tidy cabling in multi-monitor set-ups or for distributed sound reinforcement.

Type: Active
Frequency response (-3 dB, rel. Avg): 68 - 18000 Hz
Amp class: Class D
Frequency response (-10 dB, rel. Avg): 59 - 20000 Hz
Beam angle: Hor.: 50° / Vert.:90°
Speaker system: 2-way coaxial system
Max. SPL average (sine burst, BW, fullspace/1 m, THD≤10 %): 116 dB
Protection features: Overload, Multiband Limiter, Overvoltage, Overheating
RMS output power: 300 W
Monitor angle: 33 °
Peak output power: 1200 W
Max. SPL peak (sine burst, fullspace/1 m, THD≤10 %): 121 dB
Colour: Black
Crossover frequency: 2500 Hz
Number of inputs: 2
Number of outputs: 2
Line-In connector type: XLR combo socket, 6.3 mm Jack TRS female
Number of line inputs: 2
Number of mic/line inputs: 2
Line outputs connector type: XLR 3-pole female
Number of line outputs: 2
Audio processing: Delay Line, 3 band EQ (High, Mid, Low), Presets, Notch filter
Mixer: 1
Manufacturer: Custom Made
Voice coil: 2 "
Size: 8 "
Magnet: Ferrite
Manufacturer: Custom Made
Outlet diameter: 0.98 in
Driver size: 0.04 in
Voice coil: 0.04 in
Magnet: Ferrite
Rated power: 150 W
Mains fuse: T4AL/250 V
Operation voltage: 100 V AC - 230 V AC / 50 - 60 Hz
Mains connector: Mains socket indoor power in male & powerCON®
Power supply type: Switched-mode power supply (SMPS)
Flange: 36 mm (0°/5°)
Design: Bass reflex
Front grille material: Aluminium
Cabinet material: Birch multiplex, Medium-density fibreboard MDF
Material thickness: 0.59 in
Maximum air humidity (non-condensing): 80 %
Ambient temperature: 0 - 40 °C
Width: 13.39 in
Height: 10.94 in
Weight: 29.1 lbs
Depth: 14.49 in
Included accessories: Mains cable

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

accessories

MON 8 G3 PC
MON 8 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 8 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

$49.99*