Skip to main content Skip to search Skip to main navigation

Product information "MON 10 A G3 W"

The MON 10 A G3 W is part of an entirely newly developed family of powered stage monitors for high performance. The MON G3 Series incorporates the advanced technology and premium materials found in high-end monitors typically rented by professionals, making this quality available to everyone. These include, for example, advanced coaxial loudspeakers with integrated 50° x 90° CD horn, which ensure the acoustic ideal of a true point source and thus outstanding audio characteristics even at short listening distances. Besides this, the series offers a high-level of robustness, a comprehensive set of features and the elegant LD Systems design.

Although it is still very compact and can therefore be integrated inconspicuously into the stage set, the MON 10 A G3 W delivers sufficient sound pressure to assert itself even in louder band situations. The ideal dispersion geometry of 50° x 90° for monitor use and 90° x 50° for FOH use make it a multi-talent that offers the right solution for many different tasks.

Both the signal (XLR/jack combo) and the power connection (PowerCON compatible) can be looped through. This allows for elegant, tidy cabling in multi-monitor set-ups or for distributed sound reinforcement.

Width: 14.96 in
Outer diameter: 10 in
Weight: 33.53 lbs
Number of handles: 2
Monitor angle: 33 °
Power supply type: External switched-mode power supply (SMPS)
Number of line outputs: 2
Audio processing: 3 band EQ (High, Mid, Low), Presets, Delay Line, Notch filter
Depth: 16.77 in
Mains connector: Mains socket indoor power in male & powerCON®
Protection features: Overload, Overvoltage, Multiband Limiter, Overheating
Number of inputs: 2
Line outputs connector type: XLR 3-pole female
Voice coil: 1.75 "
Peak output power: 1200 W
Frequency response: 58 - 20,000 Hz
Voice coil: 2.5 "
Number of line inputs: 2
Magnet: Ferrite
Amp class: Class D
Maximum air humidity (non-condensing): 80 %
Height: 12.01 in
Speaker system: 2-way coaxial system
Outlet diameter: 10 in
Type: Active
Max. SPL peak (sine burst, fullspace/1 m, THD≤10 %): 126 dB
Storage temperature: 0 °C
Colour: White
Magnet: Ferrite
Operation voltage: 100 V AC - 230 V AC / 50 - 60 Hz
Frequency response (-10 dB, rel. Avg): 58 - 20,000 Hz
Number of outputs: 2
Rated power: 150 W
Cabinet material: Birch multiplex, Medium-density fibreboard MDF
Flange: 36 mm (0°/5°)
Crossover frequency: 1700 Hz
Front grille material: Aluminium
Material thickness: 0.59 in
Frequency response (-3 dB, rel. Avg): 72 - 18,000 Hz
Driver size: 1 "
Design: Bass reflex
Included accessories: Mains cable
Line-In connector type: 6.3 mm Jack TRS female
Size: 10 "
Ambient temperature: 0 - 40 °C
Max. SPL average (sine burst, BW, fullspace/1 m, THD≤10 %): 118 dB
RMS output power: 300 W
Beam angle: Hor.: 50° / Vert.:90°
Mains fuse: T4AL/250 V

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

accessories

MON 10 G3 PC
MON 10 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 10 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

$59.99*