LS 431 W

Universal Ring Pack suitable for all Gravity products.

The BG DBL 331 is a heavy duty carry bag with 10 mm padding that holds the two GLS331B and GLS431B lighting distance poles. The bag is made from tough 1680D nylon that is water repellent and easy to clean, a padded divider keeps the poles separate to prevent scratches. The bottom and all other points of stress are reinforced for extra strength, two carry straps with comfortable wrap-around handle and the heavy gauge single pull zipper closure of the lid provide handling convenience.

The robust, padded carrier bag, made of water-repellent 1680D ballistic nylon, is specially designed for the square base plates (563 x 563 mm) of the Gravity lighting stands GLS331B and GLS431B. It has two carrying straps with a soft Velcro handle, a sturdy double zip and a see-through window for labels.

Universal Ring Pack suitable for all Gravity products.

Universal Ring Pack suitable for all Gravity products.

Universal Ring Pack suitable for all Gravity products.

Universal Ring Pack suitable for all Gravity products.

Universal Ring Pack suitable for all Gravity products.

Universal Ring Pack suitable for all Gravity products.

Universal Ring Pack suitable for all Gravity products.

The LS M20 KEY is ideal for tightening the M20 thread inserts on LS 431 B / LS 431 W / LS 331 B In addition, the feet of the stand can be tightened as required.

Universal Ring Pack suitable for all Gravity products.

Universal Ring Pack suitable for all Gravity products.

If you are a rental or installation company, DJ or solo entertainer, you have almost certainly experienced this or a similar situation: You need two spotlights to illuminate a specific area. As a professional, you aspire to make your construction discreet and attractive. Ideally it should not attract attention. There are slimline, elegant stands for this, such as the LS 331 B from Gravity. However, if you install a standard T-bar, the combination appears clumsy and oversized. You don't need a clavilux, just two spots.The LS SUPER TB 01 Super Mini T-Bar provides the appropriate solution for this problem: With its elegant construction and adjustable width of 390-570 mm, it blends seamlessly into any environment, even museums and galleries. Thanks to the 17-mm TV spigot insert, lamps can be easily clicked into position, removing the tedious requirement of securing them with screws and wing nuts. Its flexible design enables lamps to be attached upright on the bar or suspended from it. However, despite its slimline elegance, there has been no compromise to the ruggedness of the LS SUPER TB 01: Maximum symmetrical load capacity is 20 kg per side. Spigot interval is adjustable from 330-515 mm. And if you need another spot or two, extra spigot inserts can be installed in the additional mounting holes.As you are probably already aware, ergonomic locking screws, interchangeable colour rings and high-quality workmanship come as standard with all Gravity products. The integrated Allen key holder is a small extra feature that makes this T-bar even more user-friendly.

The Gravity® LA WI 1 wheel insert is the ideal solution for all owners of Gravity® stands with a square base plate (such as LS 431 B, LS 431 W, LS 331 B) who want maximum portability and flexibility. The insert makes it possible for these stands to be moved effortlessly and safely without having to dismantle them. Thanks to the sophisticated design, the wheel insert is quickly attached to the base plate and ready for immediate use. The maximum load-bearing capacity of 40 kg makes it ideally suited for both light and heavy stands. The solid construction made of 5 mm thick steel guarantees a long service life and provides a solid foundation for daily professional use. The non-slip, low rolling resistance rubber castors ensure smooth and safe manoeuvring.Moreover, the LA WI 1 is also suitable for use with truss plates up to 7 mm in thickness.

Made from tough, long-lasting ABS, the Gravity 35 mm cable clips are designed for a firm, secure fit to speaker stands and subwoofer poles. They keep your cables neat and safely fixed in a large 24 x 16 mm outside duct and are sold in pairs.

The SF 36 M10 M lets you attach devices with M10 nut mounting to a 35mm pole. Ideal for PAR lights.

The GLSTBTV28 is a classic tripod lighting stand with twin extensions, made from thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity. The unbreakable height adjustment collars are made of steel for additional strength and feature safety pins to securely lock the extensions in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. The stand includes a T-Bar with an ergonomically formed and rubberized T-Joint – making the T-Bar not only easier to handle and carry but also look better than regular stands.

This universal crossbar quickly converts stands with a 35 mm tube diameter into light stands. It is made with light but robust aluminium and is installed quickly and safely using the robust flange with ergonomic adjustment screw.

The GLSTBTV17 is a classic tripod lighting stand with twin extensions, made from thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity.The unbreakable height adjustment collars are made of steel for additional strength to securely lock the extensions in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. The stand includes a T-Bar with an ergonomically formed and rubberised T-Joint – making the T-Bar not only easier to handle and carry but also better looking than regular stands.

The SF 3616 M lets you attach devices with a 16 mm pole mount to a 35mm pole.

The SF 36 T 28 F L is an adapter for mounting spotlights with 28 mm TV spigots on 35 mm tubes, making it ideal for lighting- and PA-stands. Thanks to the longer design, the TV spigot can be fully recessed.

Forget wobbly speaker pole connections and twisting PA speakers! With the Gravity® Grip Lock, your PA speakers stay firmly and securely in place.The SA GRIP LOCK is a steel locking adapter for 35mm tripod poles. With its ergonomic design, the Grip Lock is quick and easy to set up and also provides a low-resonance connection to your speaker.How does it work?The expanding flap-system with its robust components is easily adjusted by turning the top adjustment screw. This holds the speaker securely in place and prevents it from twisting or wobbling. The adapter is secured to the tripod with the lower set screw which in turn ensures a tight fit on the tripod.With the SA GRIP LOCK you get more than just a secure hold. It gives you a trusted tool in your audio setup, designed to perform without failure.

The Gravity® Pipe and Drape curtain system offers an innovative solution for musicians, bands, event technicians, theatres, exhibitors and stand builders. It enables swift and efficient room structuring, area partitioning, wall suspension, or walkway delineation. Utilising the PAD A adapter alongside the separately available PAD T telescopic crossbar, standard speaker or lighting stands with 35 mm mounts can seamlessly transform into comprehensive pipe and drape setups with minimal effort. Simply place the PAD A on to the stand and attach the telescopic crossbar by inserting its mounting bolts into the adapter's holes. An optional Molton curtain can later be effortlessly affixed to the crossbar.Constructed from steel and plastic, the PAD A features an internal diameter of 36 mm, perfectly suited for accommodating a 35 mm stand. It boasts four fixing holes on the top, enabling the mounting of up to four PAD T telescopic crossbars. With its convenient snap-in function for securing the telescopic crossbar mounting bolts, users can effortlessly and securely lock the crossbars in place in a matter of seconds.The Gravity® Pipe and Drape curtain system offers maximum flexibility and adaptability, seamlessly integrating with standard 35 mm stands, offering individual width and height adjustments and the ability to accommodate up to four telescopic crossbars per adapter. Whether it's for small events or expansive trade shows, this system effortlessly conforms to your unique specifications.

The Gravity® Pipe and Drape curtain system offers an innovative solution for musicians, bands, event technicians, theatres, exhibitors and stand builders. It enables swift and efficient room structuring, area partitioning, wall suspension, or walkway delineation. Utilising the PAD SET 2, consisting of the PAD A adapter, the PAD T telescopic crossbar and the PAD C B 1 Molton curtain, standard speaker or lighting stands with 35 mm mounts can seamlessly transform into comprehensive pipe and drape setups with minimal effort. Simply place the PAD A on to the stand and attach the telescopic crossbar by inserting its mounting bolts into the adapter's holes. The Molton curtain can then be effortlessly affixed to the crossbar.Constructed from steel and plastic, the PAD A features an internal diameter of 36 mm, perfectly suited for accommodating a 35 mm stand. It boasts four fixing holes on the top, enabling the mounting of up to four PAD T telescopic crossbars. With its convenient snap-in function for securing the telescopic crossbar mounting bolts, users can effortlessly and securely lock the crossbar in place in a matter of seconds.Crafted from aluminium, the PAD T telescopic crossbar extends from 190 cm to 350 cm, enabling customisable system widths. Featuring tilt joints at both ends, the crossbar facilitates straightforward and adaptable assembly without requiring a ladder or assistance from others. The PAD C B 1 black Molton curtain measures 3.50 m x 2.55 m and features a convenient Velcro strip for effortless attachment to the PAD T crossbar. Crafted from EURO molton, this flame-retardant curtain boasts an opacity of 320 g/m² and has a total weight of just under 3 kg. The Gravity® Pipe and Drape curtain system offers maximum flexibility and adaptability, seamlessly integrating with standard 35 mm stands, offering individual width and height adjustments, the ability to accommodate up to four telescopic crossbars per adapter as well as facilitating solo setup without the need for a ladder. Whether it’s for small events or expansive trade shows, this system effortlessly conforms to your unique specifications.

The Gravity® Pipe and Drape curtain system offers an innovative solution for musicians, bands, event technicians, theatres, exhibitors and stand builders. It enables swift and efficient room structuring, area partitioning, wall suspension, or walkway delineation. Utilising the PAD SET 1, consisting of the PAD A adapter and the PAD T telescopic crossbar, standard speaker or lighting stands with 35 mm mounts can seamlessly transform into comprehensive pipe and drape setups with minimal effort. Simply place the PAD A on to the stand and attach the telescopic crossbar by inserting its mounting bolts into the adapter's holes. An optional Molton curtain can later be effortlessly affixed to the crossbar. Constructed from steel and plastic, the PAD A features an internal diameter of 36 mm, perfectly suited for accommodating a 35 mm stand. It boasts four fixing holes on the top, enabling the mounting of up to four PAD T telescopic crossbar. With its convenient snap-in function for securing the telescopic crossbar mounting bolts, users can effortlessly and securely lock the crossbar in place in a matter of seconds. Crafted from aluminium, the PAD T telescopic crossbar extends from 1.90 m to 3.50 m, enabling customisable system widths. Featuring tilt joints at both ends, the crossbar facilitates straightforward and adaptable assembly without requiring a ladder or assistance from others. For the attachment of the optional Molton curtain (PAD C B 1), the crossbar boasts a Velcro strip spanning its entire width. The Gravity® Pipe and Drape curtain system offers maximum flexibility and adaptability, seamlessly integrating with standard 35 mm stands, offering individual width and height adjustments, the ability to accommodate up to four telescopic crossbars per adapter as well as facilitating solo setup without the need for a ladder. Whether it’s for small events or expansive trade shows, this system effortlessly conforms to your unique specifications.