KSX 2 RD
Set with keyboard stand X-Form double and rapid desk
$199.98
Backordered – More on the Way!
Product information "KSX 2 RD"
Especially on tour it is important that all instruments, equipment and accessories are compactly packed and can be easily stowed away in the bus. That's why the Gravity Rapid Desk Set combines the stable Gravity KSX2 keyboard stand with a double X-form and the Gravity Rapid Desk 1. That makes it easy for you to put up a sturdy table in a few simple steps and also to take it down into two separated flat pieces. Plus, this combination works in pretty much every situation, no matter if you're playing in the studio or practicing in the rehearsal room.
Measuring 100 cm wide and 48 cm deep, its large table surface provides you with plenty of room to arrange your laptop, DJ mixer, controller or even a small rack synthesizer just the way you like. The stand and tabletop can hold up to 60 kg in weight, whereas the vents in the powder-coated steel support plate ensure your equipment is kept perfectly cool.
In terms of set-up, all you have to do is slide the upper bars of the keyboard stand into the slots located on the bottom middle of the support plate and then open the X-stand. There's absolutely no need to fasten or screw tight the support plate.
| Product type: | Stands and Tripods |
|---|---|
| Max. load capacity: | 60 |
| Type: | Keyboard stands |
Login
accessories
This lightweight carry bag protects your keyboard stand from dust and scratches during transport and storage. It is made of durable, water-repellent neoprene fabric and features a rugged two-way zipper for easy access.
This steel shelf is designed to be placed on second tier keyboard stand add-ons providing a flat surface for tabletop synthesizers, laptops, controllers, drum machines, effect pedals and more. It features a front lip to prevent items from falling off while two convenient 3/8" screws in the rear corners allow you to mount microphone clips, goosenecks or boom arms. The utility shelf's left and right edges are bent down 90° adding rigidity, and two handle cutouts provide easy portability.
The KSX 1 is a stable, solid keyboard stand with an X support and a 55 kg load capacity. The height can be comfortably adjusted up to 90 cm with the quick lock. The black powder-coated steel design boasts reinforced junctures for maximum durability and long-lasting, non-slip end caps.
Especially on tour, it is important to protect your equipment from possible damage so that you can enjoy it for a very long time.Using the Gravity BG RD C cover, which is perfectly matched to the KSX 2 RD, you can protect your set-up from scratches and also keep it looking clean.Because the fine velvet material can also elegantly conceal unsightly cable runs or the usual cable tangle under the Rapid Desk. Even if the cover is illuminated with a light, it does not become transparent.In short: The Gravity BG RD C cover protects your Rapid Desk and keeps the look of your set-up nice and tidy.
Gravity® has developed the BG X2 RD B, the perfect bag for the Rapid Desk and keyboard X stands. Not only is it a robust bag made of durable and water-repellent 1680D nylon, but it also has 2 separate compartments which offer the optimal space for both the Rapid Desk and a X or double X keyboard stand.As a result, both products are optimally protected and cannot touch each other during transport, which would usually result in unsightly scratches. In addition to the sophisticated storage and the robust materials, the bag also offers a very comfortable carrying experience, which is particularly emphasized by the adjustable shoulder strap. This means that longer distances can be easily covered on foot. An additional carrying handle, which is gentle to your hands thanks to its padding, makes the bag complete.
The KSX 2 is a stable, solid keyboard stand with a double X support and a 65 kg load capacity. The height can be comfortably adjusted up to 90 cm with the quick lock. The black powder-coated steel design boasts reinforced junctures for maximum durability and long-lasting, non-slip end caps.
This keyboard stand with table-like construction offers superior stability making it particularly suitable for heavy keyboards. It is height-adjustable in small incremental steps, making the stand suitable for both seated and standing applications.The legs can be fitted in two basic configurations – either perpendicular to the vertical structure or angled outwards – the latter configuration offers additional stability and more leg room. The top rests can be adjusted to the width of the keyboard and can also be angled in small incremental steps over a range of 360 degrees. All in all, this solid steel construction comprises all features possible in such a design without compromise.For transport, both the legs and the top rest can be folded inwards, resulting in a very compact transport height. The stand includes one VARI-FOOT® leveling foot to compensate for ground irregularities.
Turn your Gravity® CART into a mobile workspace!With the Rapid Desk extension CART L 01 AC 1, you can transform your CART L 01 B together with the Rapid Desk (KS RD 1) into a stable, mobile work surface in no time at all.The extension is made of powder-coated steel and - like all Gravity® stands - extremely stable and robust. In combination with the Rapid Desk (KS RD 1), a generous maximum load capacity of up to 50 kg is achieved on the top tier. On the lower tier, up to 120 kg can be transported.For assembly, the screwed supports are simply inserted into the recesses in the middle of the Rapid Desk, the trolley is unfolded and extended to the now maximum possible dimension. No further fastening or screwing of the support is necessary.
Introducing the Gravity® Table Drink Holder - the perfect solution for keeping your drinks close and within reach at all times. With its secure hold and adjustable design, this cup holder is a must-have for any table top.The MA DRINK L TC clamp features a clamping-range of 45 mm and thanks to its 90° adjustment option, the Gravity® Table Drink Holder can be attached to your table or the sides of your shelf - horizontally or vertically.Featuring a sleek and modern design, the Gravity® Table Drink Holder is a stylish addition to any table. Its sturdy construction and secure hold ensure that your favorite bottles, cans, mugs, and glasses - with up to 100 mm diameter - stay firmly in place, so you can enjoy your drinks without worrying about spills or mess.
The MA GOOSE L is a flexible but exceptionally sturdy 15 mm-thick gooseneck with 3/8-inch interior thread and screw end that can maintain almost any bend even under stress.
Introducing the Gravity® Table Drink Holder - the perfect solution for keeping your drinks close and within reach at all times. With its secure hold and adjustable design, this cup holder is a must-have for any table top.The MA DRINK M TC clamp features a clamping-range of 45 mm and thanks to its 90° adjustment option, the Gravity® Table Drink Holder can be attached to your table or the sides of your shelf - horizontally or vertically.Featuring a sleek and modern design, the Gravity® Table Drink Holder is a stylish addition to any table. Its sturdy construction and secure hold ensure that your favorite bottles, cans, mugs, and glasses - with up to 78 mm diameter - stay firmly in place, so you can enjoy your drinks without worrying about spills or mess.
With the LED STICK 1 B, Gravity® sheds light into the dark.This compact light bar helps you to generate light wherever you need thanks to the integrated rechargeable battery.You can choose from two different whites (cool and warm white), switch and continuously dim them as desired.Another absolute highlight are the magnets. The led light bar is equipped with four strong magnets at the bottom, which allow you to attach the lamp to any metal object (e.g. racks, music stands, cases, etc.). This way you don't need to screw the lamp.And there is more to it than that. Thanks to the two 3/8" threads, the LED STICK 1 B can be mounted both horizontally and vertically to any microphone stand.For even more flexibility in positioning the light, you can rotate the light bar so that the illumination is always directed to where you need it. For safe transport, the light bar has a wrist strap that allows you to hold the LED STICK 1 B securely.
With the 16-piece Gravity X TC 1 tool case, you have the perfect set for maintaining your tripods and performing minor repairs. The thoughtfully curated contents make it easy to handle most common tasks on your tripods with ease. The iconic Gravity Knob doubles as a handle for a practical and compact bit pick-up tool. Its non-slip surface and round shape provide a comfortable and secure grip. The integrated magnetic bit holder securely keeps the bits in place, preventing accidental drops. The X TC 1 tool case includes two knob tools, along with 8 mm, 10 mm, and 13 mm sockets, allowing you to grip and secure (or loosen) screws and lock nuts simultaneously if needed. Additionally, the case contains standard Allen, Phillips, and slotted socket wrench attachments essential for minor service work on your Gravity tripods.All components are neatly and safely stored in a compact, durable case for easy organisation and transport.
Working with a laptop is all part of the day-to-day life of a DJ or studio technician, which is why the KS RD1 support plate was designed for keyboard stands. It helps to keep your precious equipment fixed in place and protect it from falling, and like all other Gravity® stands and tripods, its extremely solid and sturdy design will truly win you over.Measuring 100 cm wide and 48 cm deep, this powder-coated support plate offers enough space for virtually any type of set-up. At just over 6 kg in weight, it is not only extremely stable, but it can hold up to 60 kg. Take note here, however, that the X-stand itself can also accommodate just as much weight. The Gravity® KS X2, for example, is perfect for this purpose. The vents on the support plate's surface are just another well-thought-out detail: they help to cool laptops or other devices that generate a lot of heat. In terms of set-up, all you have to do is slide the upper bars of the keyboard stand into the slots located on the bottom middle of the support plate and then open the X-stand. There's absolutely no need to fasten or screw tight the support plate.
