Service Hotline:
+49 6081 9419-300

Help & Service

Shopping Basket

0

BMS
4507 NDL

6.5" Neodymium High-Frequency Driver 150 W 8 Ohms

Archived item
4507 NDL
Item No.:
BMS4507NDL
EAN:
4049521175831
Guarantee:
24 Months
Unit:
piece
Archived item: This item is no longer in our product range.
  • Dual Diaphragm Coaxial Planar Wave Design (patent pending)
  • Rectangular piston of 6.5" x 3/4" (162 x 19 mm)
  • Neodymium Magnet Assembly
  • Perfect acoustical coupling of individual units to create virtually continuous line source
  • Extended Bandwith (400 - 22,000 Hz)
  • With two Subsystems in one, each Driver covers a smaller Frequency Range for increased Power Handling, high Dynamic and extremely low Distortion
  • Excellent Phase...
Read on
4507 NDL
4507 NDL
6.5" Neodymium High-Frequency Driver 150 W 8 Ohms

RRP 1,400.71 £ / piece

Specifications

Specifications

General
Product type
High-frequency Drivers
Nominal Diameter
6.5" x 0.75 "
Nominal Diameter
162.5 x 19 mm
Voice Coil
3.5 / 1.75 "
Voice Coil
90 / 44.4 mm
Overall diameter
171 x 133 mm
Depth
198.5 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
150 W
maximum rated load
1000 W
Sensitivity (horn 1 W / 1 m)
112
Frequency response
400 - 22000 Hz
recommended crossover frequency
6300 Hz
Voice Coil Carrier
Kapton
Diaphragm material
Polyester
Magnet
Neodymium
Mounting holes
4
Diameter of fixing holes
M6
Pitch Circle Diameter (bolt on)
139.7 x 50.8 mm
Weight
2,2 kg

Description

The BMS 4507ND dual diaphragm coaxial planar wave driver radiates a coherent planar wave front form a rectangular piston without internal diffraction for superior dispersion control and high fidelity sound.

The driver is in fact a 2-way system employing two concentric annular ring diaphragms. Each driver covers a smaller frequency range for increased power handling, high dynamic and extremely low distortion.

This distinctive new transducer was engineered to work with 6.5-inch (162 mm x 19 mm) rectangular throat waveguides providing extremely high sensitivity. The patented design of the BMS 4507ND is a result of extensive dedicated research and development providing dramatic improvement in dynamic response, clarity and transparency. The larger annular midrange diaphragm covers the frequency range between 400 and 6,500 Hz with a smooth, linear response.

The high diaphragm excursion of max. + / - 0.8 mm results in high output and increased power handling up to 1,300 W peak. The ultra light annular diaphragm for the high range offers exceptional transient response with very high efficiency from 6 to 22 kHz.

The voice coils may be driven in conjunction with a passive crossover or driven individually from an active crossover. The unique voice coil technology employs a light weight Copper Clad Aluminum wire wound inside and outside of the Kapton™ former to improve the heat dissipation, dramatically increasing the acoustic output and reliability of the driver while minimizing the power compression. The use of high grade neodymium magnets provide improved performance while significantly reducing transducer weight.

The 4507ND is optimized for 0° to 15° vertical dispersion and allows a horizontal coverage up to 120° depending on the waveguide used. The unique design of the 4507ND dual diaphragm planar wave driver allows perfect acoustical coupling of individual units with excellent phase coherence and perfect time alignment to create virtually continuous line source.

Downloads/links

Data Sheet

Category: Data Sheet

Type: pdf

File size: 4 MB

BMS Catalogue

Category: Catalog

Type: pdf

File size: 6 MB

Item images

Category: Product images

Type: zip

File size: -

Name
Category
Type
File size
Data Sheet Data Sheet pdf 4 MB
BMS Catalogue Catalog pdf 6 MB
Item images Product images zip -
(0) Download files