Cameo
OPUS® X4 PROFILE

Cold white

According to the colour temperature scale in Kelvin (K), “cold white” is a very bright, clear light in the colour temperature range between 5,000 and 10,000 K; it is slightly artificial in character and goes well with rich primary colours.

DMX512

Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).

Environment-friendly

The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.

LED technology

LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.

Master & slave

Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.

Standalone mode

In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.

Strobe

Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.

RDM

This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.

ARTNET compatible

The device is ArtNet compatible. ArtNet is a network protocol for transmitting DMX-512 or RDM data via an ethernet connection.

The PAN & TILT feature moves light emission along the X and Y axes.

The W-DMX™ feature facilitates the wireless transmission of DMX control data.

Various dispersion angles possible

This product is ETL certified.

The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.

4 framing shutter blades

Like wing limiters, but significantly more flexible, there are four diaphragm sliders here that enable the light beam to be shaped. Each diaphragm slider can be individually angled and inserted all the way for complete shading. The diaphragm slider system can be rotated by 45° in both directions for exact positioning.

Animation wheel

The rotating animation wheel provides three-dimensional effects and is especially effective when used in combination with gobos.

Circular prism

A circular prism multiplies the beam or the gobo projection, placing the result inside a circle.

CMY

This spotlight uses a white light source and subtractive CMY colour blending (cyan, magenta, yellow) for an extremely large palette of colours.

Colour wheel

Turning the colour wheel, which is fitted with various filters, enables very fast changes of colour.

Focus

The focus function serves to focus the light beam and the gobo projection at any distance.

(Gobo wheel)

Gobo wheels are fitted with static or rotating gobos made of metal or glass. Gobos are essentially templates that allow the projection of patterns, shapes and graphics.

Linear prism

A linear prism multiplies the beam or the gobo projection, placing the result inside a row.

Linear CTO

This spotlight has a continuously variable CTO correction function (colour temperature orange) which enables settings from cold white to tungsten and warm white.

Iris

The iris is a continuously variable opening for altering the diameter of the beam.

sACN compatible

This spotlight is compatible with the sACN protocol (streaming ACN) for transporting DMX data via a network.