Cameo
PAR 64 CAN 10 BS
183 x 10 mm LED RGB PAR light in black housing
- Powerful 183 x 10 mm RGB LEDs
- Low power consumption
- Operated via DMX, in master/slave mode or standalone mode
- Integrated microphone for sound control
- Simple to operate using the three buttons and LED display
- Double brackets included as standard
- Rugged compact aluminum housing
RRP 121.53 $ / piece
Specifications
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
RGB additive colour system
With additive colour blending, all colours and white are created by blending different amounts of red, green and blue light. The RGB system is used in televisions, computer monitors and digital cameras, for example.
Music control
In music control mode, the device is controlled via the built-in microphone and can follow the rhythm of the music, for example.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
Strobe
Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.
Description
Professional PAR can with 183 ultra-bright 10-mm LEDs in the RGB colour system (60 x red, 60 x green, 63 x blue) in a conventional sturdy aluminium housing and with a beam angle of 25 degrees. Featuring a double bracket, the CLP 64 RGB 10 BS PAR is suitable for use both as a floor PAR and for mounting to cross-beams and bars.
Actuation is either via the DMX protocol (3-pole XLR) with four or six control channels, in master/slave mode or standalone mode (sound control, colour change, solid colours). It is controlled by three buttons and an LED display.
Its power consumption is a mere 30 Watts.