Cameo
PAR 64 CAN RGBA 10 PS
177 x 10 mm LED RGBA PAR Light in Polished Housing
- Powerful 177 x 10 mm RGBA LEDs
- RGBA for warm, rich colour mixing
- Operated via DMX, in master/slave mode or standalone mode
- Integrated microphone for sound control
- Simple to operate using the four buttons and LED display
- Double brackets included as standard
- Rugged compact aluminum housing
RRP 102.00 $ / piece
Specifications
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
RGB additive colour system plus amber LEDs
Amber is a colour that is outside the RGB spectrum. Additional amber LEDs allow warmer and richer colours to be created.
Music control
In music control mode, the device is controlled via the built-in microphone and can follow the rhythm of the music, for example.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
Strobe
Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.
Description
The Cameo CLP64RGBA10PS is a professional PAR 64 spotlight in a traditional aluminium housing with 177 bright, long-lasting 10mm LEDs in the colours red, green, blue, and amber (RGBA system). Two adjustable brackets with knurled locking screws permit use as a floor spot and mounting on traverses, walls, and ceilings. The beam angle is 25°.
The CLP64RGBA10PS can be controlled in 7-channel DMX mode or in standalone mode, in each case with six functions. It is operated using buttons for mode, enter, up, and down. A 4-position LED display indicates the corresponding setting. XLR sockets serve as DMX in- and outputs for controlling several spotlights in series.
Additional advantages are a low power consumption of just 30W and minimal generation of heat. The spotlight is also available in black (CLP64RGBA10BS).