Service Hotline:
+49 6081 9419-300

Help & Service

Shopping Basket

0

Ram Audio
DUBHE 10Q DANTE

DUBHE 10Q 4 Chanel Amplifier + DANTE

DUBHE 10Q DANTE

Price on request

Item No.:
RAMDUBHE10QD
EAN:
4049521807077
Guarantee:
60 Months
Unit:
piece
Series:
Versions:
  • Low weight high efficiency class D topology
  • Universal power supply with PFC
  • Up to 10000 W in 4 channels
  • 8, 4 and 2 Ohm low impedance operation
  • 100, 70, 50 and 35 V high impedance modes
  • RAM Audio advanced Power Control Management (PCM™)
  • Optional Dante™ Networking (AES67) and GPIO for third party interface
  • Subsonic filter
  • Signal link mini-dips configurable
  • Output level control in rear...
Read on
DUBHE 10Q DANTE
DUBHE 10Q DANTE
DUBHE 10Q 4 Chanel Amplifier + DANTE

Price on request

Specifications

Specifications

General
Channels
4
Total output power
10000 W
Rated ouput power @ 2 Ohms (all channels driven)
4 x 2500 W
Rated ouput power @ 2 Ohms (single channel)
1 x 2500 W
Rated ouput power @ 2.67 Ohms (all channels driven)
4 x 2500 W
Rated ouput power @ 2.67 Ohms (single channel)
1 x 3300 W
Rated ouput power @ 4 Ohms (all channels driven)
4 x 2500 W
Rated ouput power @ 4 Ohms (single channel)
1 x 2500 W
Rated ouput power @ 8 Ohms (all channels driven)
4 x 1250 W
Rated ouput power @ 8 Ohms (single channel)
1 x 1300 W
Rated ouput power (4 Ohms, bridged)
2 x 5000 W
Rated ouput power (8 Ohms, bridged)
2 x 5000 W
Hi - Z 100 V
1 x 2500 W, 4 x 2500 W
Hi - Z 70 V
1 x 2500 W, 4 x 2500 W
Max output voltage
150 Vpeak
Max. output current
50 Apeak
Total Harmonic Distortion (THD)
< 0.05 %
Crosstalk (20Hz - 1kHz)
> 70 dB
Voltage gain
26 dB to 44 dB
Signal/noise ratio
111 dB
Operating voltage
90 V AC - 265 V AC, 50 - 60 Hz
1/8 rated power (@230V/4 ohm)
7.3 A
Protection circuits
DC, ICL™, mute when turning on, on/off transients, Open or mismatched loads, PCM ™, power supply overload, RF, Short circuit, soft start, thermal overload
Width
483 mm
Height
89 mm
Depth
342 mm
Weight
7 kg

Description

DUBHE Series are Hi efficiency 4-channels mid/high power level amplifiers dedicated to the installation market where they can be connected loads in both, low and high impedance, through their input and output Phoenix connectors and output level control potentiometers in the rear panel.

In the design it has been implemented the advanced RAM Audio Power Control Management to configure how to sharing the power between between the channels according to the user needs, having the possibility to obtain in just one channel the maximum power.

These amplifiers have many configuration possibilities such as bridge mode, subsonic filter, channel power limiter and signal link, among others, in order to satisfy the needs of any particular installation. These devices also can be equipped with a GPIO connection to interface with a third party control system. Optional Dante™ Networking (AES67) and GPIO connection to interface with a third party control system are available for DUBHE amplifiers.

With all these configurations DUBHE amplifiers can meet the power requirements of any installation from 300 up to 2500 W.

Downloads/links

Technical data sheet

Category: Data Sheet

Type: pdf

File size: 426 KB

RAMAUDIO Catalogue

Category: Catalog

Type: pdf

File size: 2 MB

Item images

Category: Product images

Type: zip

File size: -

Name
Category
Type
File size
Technical data sheet Data Sheet pdf 426 KB
RAMAUDIO Catalogue Catalog pdf 2 MB
Item images Product images zip -
(0) Download files