Service Hotline:
+44 1702 6139 22

Help & Service

Shopping Basket


LD Systems
IMA 30

Installation Mixing Amplifier 35W @ 4 Ohms / 100 V / 70 V

IMA 30

Price on request

Item No.:
60 Months
  • Line input for emergency signal with contact closure
  • 2 microphone/line input sockets with microphone/line switch and switchable 24 V phantom power
  • Switchable chime feature in Mic/Line 1 channel
  • 2 line inputs with RCA sockets and Bluetooth 4.0 interface (mono summed)
  • 35W Class-D Amplifier with Lo-Z / Hi-Z selector switch and 4 Ohm / 100V / 70V outputs
  • Balanced AUX line output with Music-Mix switch, for controlling external...
Read on
IMA 30
IMA 30
Installation Mixing Amplifier 35W @ 4 Ohms / 100 V / 70 V

Price on request



Product type
Installation mixer preamplifier
Emergency input
1 balanced line input
Mic/ line inputs
Music sources
2 unbalanced stereo line inputs, Bluetooth 4.0
Line outputs
Powered outputs
1 with output mode selector (Low-Z/High-Z)
Priority levels
Emergency Input
Nominal input sensitivity
-6 dBu (Sine 1 kHz, Gain max)
Nominal input clipping
20 dBu (Sine 1kHz)
5-pin Terminal Block, pitch 5.08mm
Mic/Line inputs 1-2
Nominal input sensitivity Mic
- 36 dBu (Sine 1 kHz, Gain max)
Nominal input clipping Mic
- 17 dBu (Sine 1kHz)
Nominal input clipping line
Line +19dBu (Sine 1kHz)
Phantom power
+ 24V, 10mA switchable
Connector Mic/Line1
5-pin Terminal Block, pitch 5.08mm, XLR/6.3 mm jack
Connector Mic/Line 2
1 dual RCA Mono Summed, 3-pin Terminal Block, pitch 5.08 mm
Music inputs - CD/AUX
Nominal input sensitivity CD/AUX
- 6.22 dBV (Sine 1 kHz, Gain max)
Nominal input clipping CD/AUX
7.78 dBV (Sine 1kHz)
Connector CD/AUX
2 x dual RCA Mono Summed
Amplifier Output
Amplifier Outputs
High-Z: 70V or 100V outputs, Low-Z: 4 ohm minimum load
Preamplifier input
5-pin Terminal Block, pitch 5.08mm
RMS Power ( W )
35 W (Continuous sine wave 1kHz, 4 ohm load)
Power ( Peak ) (W)
39 W (100 msec sine 1kHz burst @ 4 ohm load)
Frequency range
20 Hz - 20 kHz (LO-Z, -3 dB), 60 Hz - 20 kHz (HI-Z, -3 dB)
Tone controlBass
+/-10dB (100Hz)
Tone control Treble
+/-10dB (100Hz)
Protection circuits
Audio Limiter, over-current, short circuit, thermal overload
Aux Output
Connector AUX-output
3-pin Terminal Block, pitch 5.08 mm
Maximum gain
22 dB
General data
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption (max.)
70 W
Idle power consumption
7 W (no signal input)
Operating temperature ( non-condensing )
0°C - 40°C; < 85% humidity, Non condensing
Time to Auto-standby
Dimensions (W x H x D) ( height with rubber feet )
210 x 96.5 x 266.76 mm
Optional accessories
Rack mounting hardware
2,39 kg


Permanent installations require solutions which offer a visually discrete design that blends into the background while still being flexible and versatile in their functions. You need to be able to connect different audio sources and manage them, to mute non-priority signals during announcements or emergency calls.

With IMA 30, LD Systems presents the first model of the new IMA® mixing amplifier-series, which leaves nothing to be desired in terms of design and flexibility.

Seamless integration with IMA 30 is a sure thing in both industrial and commercial applications thanks to the compact 9.5-inch housing design, an array of connection possibilities, including Bluetooth for wireless connection of Audio and a multistage priority circuit. IMA 30 is equipped with four priority levels to manage all connected audio signals during emergency or priority announcements. An automatic standby mode can also be activated to reduce power consumption during absence of audio signal.

The mixing amplifier features two priority contact closures: one for emergency input to mute both Mic/Line and music sources, and one for Mic/Line Channels to mute music sources only.

The outputs provide 35 W of power at 4 Ohm, a two-band equalizer for bass and trebles as well as 70 V/100 V tap settings. The Hi-Z and Lo-Z selector switch lets you separate the output signal completely from the output transformer to ensure an optimal frequency response for low impedance applications. The built-in aux output can be used to add external power amplifiers, active subwoofers or on-hold music systems to the IMA 30. You can also choose to send the entire mix or only the selected music signal source to the aux output using the music-mix selector switch.

Videos on this product


24. Aug 2023
LD SHORTS | Pro Audio Tips by Gabriel Alonso Calvillo
21. Jul 2022
DQOR & IMA – a strong pair for fixed sound reinforcement in shops and restaurants
13. Jan 2022
Soft sound in a green paradise – LD Systems DQOR provides sound for restaurant at Vipingo Ridge Resort
1. Feb 2021
Press: New Loudspeakers, DSP Amplifiers, Matrix Processors, and Much More – LD Systems Expands Its Portfolio for Permanent Installations
28. Jan 2020
Press: Adam Hall Group Highlights New Audio and Lighting Products at ISE 2020
19. Mar 2019
Press: Adam Hall Group Premieres New Products and Visionary Campaigns at Prolight + Sound 2019
25. Oct 2022
LD Systems Multi-Room Sound System with ZONE X Matrix Processor in the Feldberghaus


LD Systems Catalogue

Category: Catalog

Type: pdf

File size: 38 MB

User´s Manual

Category: Manual

Type: pdf

File size: 17 MB

Tender documents

Category: Tender Specifications

Type: zip

File size: 162 KB

Item images

Category: Product images

Type: zip

File size: -

File size
LD Systems Catalogue Catalog pdf 38 MB
User´s Manual Manual pdf 17 MB
Tender documents Tender Specifications zip 162 KB
Item images Product images zip -
(0) Download files