Numero verde assistenza:
+34 9336 3536 3

Palmer
RIVER wupper

Scatola di isolamento passivo di linea

RIVER wupper

Prezzo consigliato 120,00 € / piece

N. articolo:
PWUPPER
EAN:
4049521705311
Garanzia:
60 Mesi
Unità:
piece
Serie:
  • Isolamento di linea per chitarra/basso/tastiera; adatto anche per HiFi e autoradio
  • Canale singolo: Ingresso e uscita a jack
  • Elimina in modo affidabile il ronzio dell'anello di terra e i segnali di interferenza.
  • Isolamento galvanico del trasformatore
  • Può essere utilizzato per bilanciare i segnali
  • Suono puro e inalterato
  • Funzionamento passivo: semplice e a prova di guasto
  • Senza distorsione fino a +6...
Continua a leggere
RIVER wupper
RIVER wupper
Scatola di isolamento passivo di linea

Prezzo consigliato 120,00 € / piece

Specifiche

Specifiche

Generalità
Tipo di prodotto
Isolatore di linea
Numero canaline
1
Tipo
Passivo
Trasformatore isolato
Numero di ingressi
1
tipo di ingresso
simmetrico/ asimmetrico
Connessioni ingressi
Jack da 6,3 mm
Numero uscite
1
Tipo di uscita
simmetrico/ asimmetrico
Connessioni di uscita
Jack da 6,3 mm
Commutare Ground Lift
No
Cassa
Colata continua di alluminio
Dimensioni (H/W/D)
110 x 50 x 50 mm
Peso
0,3 kg
Temperatura ambiente durante il funzionamento
-20 - 70 °C
Umidità relativa
< 80 %, non condensante
Accessori (forniti in dotazione)
Etichetta di iscrizione (etichetta turistica), Piedini in gomma
Audio
Livello max di ingresso (< 1% THD, 20 Hz)
+ 10 dBu
Livello max di ingresso (< 1% THD, 1 kHz)
+ 32 dBu
Risposta in frequenza (±0,2dB, relativa a 1kHz)
20 Hz - 20 kHz
Impedenza d'ingresso (1 kHz)
17 kOhm
Impedenza d'uscita (1 kHz)
500 Ohm
THD (30 Hz, +4 dBu, unity, non pesato)
< 0,09 %
THD (1 kHz, +4 dBu, unity, non pesato)
< 0,002 %
IMD (SMPTE) (60 Hz / 7 kHz, 4:1, +4 dBu)
< 0,002 %
Rapporto del trasformatore
1 : 1

Descrizione

The more complex the setup, the higher the chance of ground loops. With the Palmer wupper Line Isolation Box, everything is quiet again so you can enjoy your audio without humming and buzzing.

The Palmer wupper is an isolation transformer in a robust aluminium and steel housing. It separates the ground potentials of two devices so that equalising currents are prevented and only your sound is transmitted - clean and without interference.

The Palmer wupper was developed for guitar and bass applications, but its brilliant, unaltered sound is just as suitable for keyboards and hi-fi equipment. The inputs and outputs with jack connections can be balanced or unbalanced. This means that the Palmer wupper can also be used to balance unbalanced signals, which allows longer cable runs without affecting the sound. Due to its passive design, the wupper requires neither batteries nor phantom power. This makes it extremely failure-proof.

The Palmer wupper is a simple, efficient humming killer: Connect it between two devices and the interference is gone. Sometimes it can be that simple!

Download/Link

scheda informativa

Categoria: Manual

Tipo: pdf

Dimensione file: 3 MB

Catalogo Palmer

Categoria: Catalog

Tipo: pdf

Dimensione file: 31 MB

Immagini articoli

Categoria: Immagini dei prodotti

Tipo: zip

Dimensione file: -

Nome
Categoria
Tipo
Dimensione file
scheda informativa Manual pdf 3 MB
Catalogo Palmer Catalog pdf 31 MB
Immagini articoli Immagini dei prodotti zip -
(0) Scarica file