Palmer Power Attenuator - Control the volume of your guitar amp

The PDI06 is a power attenuator for live applications. The device is connected between the amplifier output and the speaker cabinet. It makes it possible to use the popular power stage distortion of tube amplifiers while reducing the associated high volume level. This permits practical volume reduction in six increments from 100% to 18% for stage and practice room situations. An additional setting mutes the speaker completely; the PDI06 then functions as a LOAD BOX and absorbs the entire output power of the amplifier.

This mode of operation is useful, for example, when connecting an amplifier equipped with a speaker cabinet emulation directly to the mixing desk using an existing line-out and loud volume levels in the recording booth are undesirable. The unit has an input for the speaker signal from the amplifier and two outputs for connecting speaker cabinets.

The total impedance of the speakers must equal the value shown on the PDI06. For example: the outputs of a PDI06 that is specified for 8 ohms can be connected to one 8 ohm cabinet or two 16 ohm cabinets (the 16 ohm version has only one output). The output of the (tube) amplifier is also set to 8 ohms.

RRP 342.00 $ / piece

Exclusive distribution
This item can be found here:
Adam Hall North America Inc.

Specifications

Product type
Speaker Simulators

Channels
1

Input type
unbalanced

Inputs
1

Input connectors
6.3 mm jack

Output type
unbalanced

Outputs
2

Output connectors
6.3 mm jack

Controls
bypass , rotary attenuation switch

Dummy load
Yes

Dummy load impedance
8 Ohm(s)

Max. load
120 W

Voicing filter
no

Power attenuator
Yes

Transformer isolated outputs
no

Cabinet material
sheet steel/aluminium

Cabinet surface
powder coated/anodized

Width
120 mm

Depth
120 mm

Height
50 mm

Weight
2,4 kg

Videos

Videos on this product

Downloads/links