ROADBUDDY 10 HHD 2

ROADBUDDY 10 HHD 2

Battery-Powered Bluetooth Speaker with Mixer and 2 Wireless Microphones

ROADBUDDY 10 HHD 2

Nr artykułu: LDRBUD10HHD2

Gwarancja: 24 miesiące

EAN: 4049521267338

Zakup w partiach: 1

Jednostka: Sztuka

Jednostka opakowaniowa: 1

Seria:ROAD

Wersje:

Najważniejsze informacje o artykule:

The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has two UHF radio receiver who operates in the license-free 863 - 865 MHz range. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. Two handheld microphone with 10 mW output power(LDRBUD10HHD2), two headset microphones with belt pack (LDRBUD10BPH2) or as an alternative a handheld microphone and a headset microphone with belt pack (LDRBUD10HBH2) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

Specyfikacje

Type
Active
Szczytowa moc wyjściowa
480 W
Moc wyjściowa RMS
120 W
Klasa wzmacniacza
Class D
Maks. Szczyt SPL
115 dB
Maks. Średni SPL
96 dB
Liczba wejść
3
Typy złączy wejściowych
RCA żeńskie
Funkcje ochronne
Zwarcie, Przepięcie, Przeciążenie
Kolor
Czarny
Cechy
Strumieniowe przesyłanie dźwięku (A2DP), Bluetooth MIDI
Zasięg Bluetooth
≤70 m (Klasa 1-2)
Kanały
16
Złącze antenowe
TNC female
Anteny
2 x TNC female
Liczba wejść mikrofonowych/liniowych
2
Mic/Line-in connector type
XLR combo socket
Liczba wejść mikrofonowych
2
Mic-in connector type
XLR combo socket
Liczba wejść liniowych
1
Typ złącza Line-In
XLR combo socket
Liczba wejść muzycznych
2
Typy złączy wejść muzycznych
RCA żeńskie
Mikser
Tak
Kanały miksera
2
Przetwarzanie dźwięku
EQ 2-pasmowy (wysokie, niskie)
Rozmiar
10 "
Magnes
Ferryt
Rozmiar sterownika
1 "
Projekt
Miękka kopułka wysokotonowa
Magnes
Ferryt
Napięcie robocze
100 V AC - 120 V AC / 50 - 60 Hz, 220 V AC - 240 V AC / 50 - 60 Hz
Typ zasilania
Zasilacz impulsowy (SMPS)
Mains connector
IEC C14 plug male
Napięcie robocze
12 V
Pojemność baterii
5 Ah
Żywotność akumulatora
8 h
Projekt
Bass reflex
Kołnierz
36 mm (0°/5°)
Materiał obudowy
Polipropylen
Szerokość
415 mm
Wysokość
525 mm
Głębokość
328 mm
Waga
16,5 kg
Dołączone akcesoria
Kabel sieciowy, Wireless microphone, IR remote control

Wideo na temat tego produktu

Akcesoria

Części zamienne

Do pobrania

Centrum pobierania
W naszym centralnym centrum pobierania znajdziesz wszystkie pliki do pobrania dotyczące marek, produktów i innych tematów związanych z obsługą.

Do centrum pobierania

Historie

Logo EMAS

Posiadamy certyfikat EMAS !

Copyright © 2026 Adam Hall GmbH. Wszelkie prawa zastrzeżone. | * Bez VAT.