ROADBUDDY 10 BPH 2
Archiwum

ROADBUDDY 10 BPH 2

Battery-Powered Bluetooth Speaker with Mixer, 2 Bodypack and 2 Headsets

Nr artykułu: LDRBUD10BPH2

Gwarancja: 24 miesiące

EAN: 4049521267413

Zakup w partiach: 1

Jednostka: Sztuka

Jednostka opakowaniowa: 1

Seria:ROAD

Wersje:

Najważniejsze informacje o artykule:

  • Battery powered speaker solution
  • Integrated radio receiver 863 - 865 MHz for license-free operation
  • Bluetooth player with USB port and SD card slot
  • Class D power amplifier with 480 watts of peak power
  • 2 combo sockets for microphone or line inputs
  • 3.5 mm Aux input
  • Master section with 2-band EQ
  • Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
  • 2 Wireless microphones and IR-remote control included

Specyfikacje

Typ
Active
Szczytowa moc wyjściowa
480 W
Moc wyjściowa RMS
120 W
Klasa wzmacniacza
Class D
Maks. Szczyt SPL
115 dB
Maks. Średni SPL
96 dB
Liczba wejść
3
Typy złączy wejściowych
XLR combo socket, RCA żeńskie, 3.5 mm Jack TRS female
Funkcje ochronne
Zwarcie, Przeciążenie, Przepięcie
Kolor
Czarny
Zasięg Bluetooth
≤70 m (Klasa 1-2)
Kanały
16
Złącze antenowe
TNC female
Anteny
2 x TNC female
Liczba wejść mikrofonowych/liniowych
2
Typ złącza Mic/Line-in
XLR combo socket
Liczba wejść mikrofonowych
2
Typ złącza Mic-in
XLR combo socket
Liczba wejść liniowych
1
Typ złącza Line-In
XLR combo socket
Liczba wejść muzycznych
2
Typy złączy wejść muzycznych
RCA żeńskie, 3.5 mm Jack TRS female
Mikser
Tak
Kanały miksera
2
Przetwarzanie dźwięku
EQ 2-pasmowy (wysokie, niskie)
Rozmiar
10 "
Producent
Custom Made
Magnes
Ferryt
Rozmiar sterownika
1 "
Projekt
Miękka kopułka wysokotonowa
Producent
Cutom Made
Magnes
Ferryt
Napięcie robocze
100 V AC - 120 V AC / 50 - 60 Hz, 220 V AC - 240 V AC / 50 - 60 Hz
Typ zasilania
Zasilacz impulsowy (SMPS)
Złącze sieciowe
IEC C14 plug male
Napięcie robocze
12 V
Pojemność baterii
5 Ah
Żywotność akumulatora
8 h
Projekt
Bass reflex
Kołnierz
36 mm (0°/5°)
Materiał obudowy
Polipropylen
Szerokość
415 mm
Wysokość
525 mm
Głębokość
328 mm
Waga
16.5 kg
Dołączone akcesoria
Bodypack transmitter, IR remote control, Kabel sieciowy, Headset microphone

Opis

ROADBUDDY 10 BPH 2

The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has two UHF radio receiver who operates in the license-free 863 - 865 MHz range. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. Two handheld microphone with 10 mW output power(LDRBUD10HHD2), two headset microphones with belt pack (LDRBUD10BPH2) or as an alternative a handheld microphone and a headset microphone with belt pack (LDRBUD10HBH2) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

Wideo na temat tego produktu

Akcesoria

Części zamienne

Do pobrania

Centrum pobierania
W naszym centralnym centrum pobierania znajdziesz wszystkie pliki do pobrania dotyczące marek, produktów i innych tematów związanych z obsługą.

Do centrum pobierania

Historie

Do kupienia u

Pokaż sprzedawców z:

Nie znalazłeś sprzedawcy? Poszukaj na Google Shopping!

Lub znajdź Sprzedawcy w okolicy!

Logo EMAS

Posiadamy certyfikat EMAS !

Copyright © 2026 Adam Hall GmbH. Wszelkie prawa zastrzeżone. | * Bez VAT.