• Battery-powered speaker solution
  • Integrated radio receiver 863 - 865 MHz for license-free operation
  • Bluetooth player with USB port and SD card slot
  • Class D power amplifier with 480 watts of peak power
  • 2 combo sockets for microphone or line inputs
  • 3.5 mm Aux input
  • Master section with 2-band EQ
  • Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
  • 2 Wireless microphones and IR-remote control included

Description

The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has two UHF radio receiver who operates in the license-free 863 - 865 MHz range. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. Two handheld microphone with 10 mW output power(LDRBUD10HHD2), two headset microphones with belt pack (LDRBUD10BPH2) or as an alternative a handheld microphone and a headset microphone with belt pack (LDRBUD10HBH2) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

Specifications

Product type
Battery-powered PA speaker

Low/mid driver dimensions
10 "

Woofer size
254 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

HF driver dimensions
1 "

HF Driver Size
25.4 mm

HF driver magnet
Ferrite

HF driver brand
Custom-made

Amplifier
Class D

RMS
120 W

Peak power
480 W

Frequency response
55 - 18000 Hz

SPL (1W/1m)
96 dB

Max. SPL
115 dB

Protection circuits
over-current , overload protection , short circuit

Controls
AUX / MP3 switch , CD / Tape IN Level , Echo , high , low , Mic 1 Level , Mic 2 Level , Total volume

Indicators
Charge/battery status , Power

Media player


Supported media
Bluetooth , SD Card , USB stick

Supported formats
MP3 file , WAV-CD , WMA file

Media player controls
equalizer , Mode (Menu / Bluetooth /SD / USB) , Next Track , Play / Pause , Previous Track , Repeat , Stop

Media player display elements
Lighted multifunctional LC display

Line inputs
1

Line input connectors
2 x RCA , 2 x XLR , 3.5 mm jack , 6.3 mm jack

Mic inputs
2

Mic inputs
2 x XLR , 6.3 mm jack

Wireless Unit


Transmission frequency range
863 - 865 MHz

Modulation Type
FM

Channels
16

Frequency Response Wireless Unit
50 - 17000 Hz

Controllers Wireless Unit
ASC , Mute Level (Squelch) , Power / Volume , Value Down , Value Up

Indicators Wireless Unit
AF (LED) , LED Display , RF (LED)

Connections Wireless Unit
nTNC for receiver antenna

RF Transmitter Power Output
10 mW

Handheld Microphone Weight
0.285 kg

Handheld Microphone Material
Aluminum

Operating voltage
Switching power supply

Operating voltage
100 V - 120 V / 60 Hz , 220 V - 240 V AC / 50 Hz

Rechargeable batteries
12 V / 5 Ah

Cabinet material
polypropylene

Cabinet construction
vented

Width
415 mm

Height
525 mm

Depth
328 mm

Weight
17,2 kg

Other features
extendable handle , IR Remote for Media Player , Stand mount 36 mm , Transport casters , transport handle

Videos

Videos on this product

Downloads/links

Spare parts