ROADBUDDY 10 BPH 2
Archivio

ROADBUDDY 10 BPH 2

Battery-Powered Bluetooth Speaker with Mixer, 2 Bodypack and 2 Headsets

ROADBUDDY 10 BPH 2

Cod. articolo: LDRBUD10BPH2

Garanzia: 24 mesi

EAN: 4049521267413

Scala indicizzata: 1

Unità: Pz

Unità di imballaggio: 1

Serie:ROAD

Versioni:

Articolo in evidenza:

The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has two UHF radio receiver who operates in the license-free 863 - 865 MHz range. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. Two handheld microphone with 10 mW output power(LDRBUD10HHD2), two headset microphones with belt pack (LDRBUD10BPH2) or as an alternative a handheld microphone and a headset microphone with belt pack (LDRBUD10HBH2) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

Specifiche

Type
Active
Potenza di picco in uscita
480 W
Potenza di uscita RMS
120 W
Classe Amp
Class D
Max. Picco SPL
115 dB
Max. SPL medio
96 dB
Numero di ingressi
3
Tipi di connettore di ingresso
RCA femmina
Caratteristiche di protezione
Cortocircuito, Sovratensione, Sovraccarico
Colore
Nero
Caratteristiche
Streaming audio (A2DP), Bluetooth MIDI
Gamma Bluetooth®
≤70 m (Classe 1-2)
Canali
16
Connettore antenna
TNC female
Antenne
2 x TNC female
Numero di ingressi microfonici/linea
2
Mic/Line-in connector type
XLR combo socket
Numero di ingressi per microfono
2
Mic-in connector type
XLR combo socket
Numero di ingressi di linea
1
Tipo di connettore Line-In
XLR combo socket
Numero di ingressi musicali
2
Tipi di connettore degli ingressi musicali
RCA femmina
Mixer
Canali del mixer
2
Elaborazione audio
EQ 2 bande (alte, basse)
Dimensione
10 "
Magnete
Ferrite
Dimensione del driver
1 "
Design
Tweeter a cupola morbida
Magnete
Ferrite
Tensione di funzionamento
100 V AC - 120 V AC / 50 - 60 Hz, 220 V AC - 240 V AC / 50 - 60 Hz
Tipo di alimentazione
Alimentazione a commutazione (SMPS)
Mains connector
IEC C14 plug male
Tensione di esercizio
12 V
Capacità della batteria
5 Ah
Durata dell'accumulatore
8 h
Design
Riflesso dei bassi
Flangia
36 mm (0°/5°)
Materiale del cabinet
Polipropilene
Larghezza
415 mm
Altezza
525 mm
Profondità
328 mm
Peso
16,5 kg
Accessori inclusi
Cavo di rete, IR remote control, Bodypack transmitter, Headset microphone

Video relativi a questo articolo

Accessorio

Ricambi

Download

Centro di download
Nel nostro centro download centrale troverà tutti i download relativi a marchi, prodotti e altri argomenti di servizio.

Vai al Centro di download

Storie

Logo EMAS

Abbiamo la certificazione EMAS !

2026 Copyright © Adam Hall GmbH. Tutti i diritti riservati. | * IVA esclusa.