ROADBUDDY 10 BPH 2 B6
Archivio

ROADBUDDY 10 BPH 2 B6

Battery-Powered Bluetooth Speaker with Mixer, 2 Bodypack and 2 Headsets

Cod. articolo: LDRBUD10BPH2B6

Garanzia: 24 mesi

EAN: 4049521267536

Scala indicizzata: 1

Unità: Pz

Unità di imballaggio: 1

Serie:ROAD

Versioni:

Articolo in evidenza:

  • Battery-powered speaker solution
  • Integrated radio receiver 655 - 679 MHz
  • Bluetooth player with USB port and SD card slot
  • Class D power amplifier with 480 watts of peak power
  • 2 combo sockets for microphone or line inputs
  • 3.5 mm Aux input
  • Master section with 2-band EQ
  • Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
  • 2 Wireless microphones and IR-remote control included

Specifiche

Tipo di prodotto
Altoparlanti PA a batterie
Dimensioni woofer
10 Inch
Dimensioni woofer
254 mm
Magnete woofer
Ferrite
Marca woofer
Custom-made
Dimensioni driver HF
1 Inch
Dimensioni driver HF
25.4 mm
Magnete driver HF:
Ferrite
Marca driver HF
Custom-made
Amplificatore
Classe D
Potenza (RMS)
120 W
Potenza (picco)
480 W
Risposta in frequenza
55 - 18000
SPL (1 W / 1 m)
96 dB
SPL massimo
115 dB
Protezioni
Sovratensione, Cortocircuito, Protezione dal sovraccarico
Elementi di comando
low, Mic 2 Level, Echo, Volume totale, CD / Tape IN Level, Interruttore AUX / MP3, Mic 1 Level, high
Indicatori
Stato carica/batteria, Power
Dispositivi compatibili
Penna USB, Bluetooth, Scheda di memoria SD
Formati supportati
File MP3, File WMA, File WAV
Dispositivi di comando Media Player
Play / Pause, Titolo precedente, Titolo successivo, Equalizzatore, Repeat, Mode (Menu / Bluetooth /SD / USB), Stop
Dispositivi di visualizzazione Media Player
Display LCD multifunzione illuminato
Ingressi di linea
1
Connessioni di ingresso di linea
n. 2 XLR, 2 RCA, Jack da 6,3 mm, Jack da 3,5 mm
Ingressi microfono
2
Connessioni di ingresso microfono
Jack da 6,3 mm, n. 2 XLR
Campo di radiofrequenze
655 - 679
Tipo di modulazione
FM
Canali
16
Risposta in frequenza Wireless Unit
50 Hz - 17000 Hz
Dispositivi di comando Wireless Unit
Down, Mute Level (Squelch), Up, Power/Volume, ASC
Dispositivi di visualizzazione Wireless Unit
AF (LED), Display LED, RF (LED)
Collegamenti Wireless Unit
nTNC per antenna Receiver
Uscita RF potenza di trasmissione
10 MW
Peso bodypack
0.08 kg
Materiale bodypack
Plastica ABS
Alimentazione
Alimentatore switching
Tensione di esercizio
100 V - 120 V / 60 Hz, 220-240 V AC/50 Hz
Batterie ricaricabili
12 V / 5 Ah
Materiale cassa
Polipropilene
Modello cassa
Bass reflex
Larghezza
415 mm
Altezza
525 mm
Profondità
328 mm
Altre caratteristiche
Telecomando IR per Media Player, Flangia stativo 36 mm, Impugnatura, Maniglia allungabile, Ruote di trasporto

Descrizione

ROADBUDDY 10 BPH 2 B6

The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has two UHF radio receiver who operates with 655 - 679 MHz range. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. Two handheld microphone with 10 mW output power(LDRBUD10HHD2B6), two headset microphones with belt pack (LDRBUD10BPH2B6) or as an alternative a handheld microphone and a headset microphone with belt pack (LDRBUD10HBH2B6) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

Video relativi a questo articolo

Accessorio

Ricambi

Download

Centro di download
Nel nostro centro download centrale troverà tutti i download relativi a marchi, prodotti e altri argomenti di servizio.

Vai al Centro di download

Storie

Logo EMAS

Abbiamo la certificazione EMAS !

2026 Copyright © Adam Hall GmbH. Tutti i diritti riservati. | * IVA esclusa.