DUBHE 2.5Q

DUBHE 2.5Q

DUBHE 2.5Q 4 Channel Amplifier

Référence: RAMDUBHE25Q

Garantie: 60 mois

Code EAN: 4049521807008

Tarif différencié: 1

Unité: Pièce

Unité d'emballage: 1

Série:DUBHE

Modèles:

Points forts du produit:

  • Low weight high efficiency class D topology
  • Universal power supply with PFC
  • Up to 10000 W in 4 channels
  • 8, 4 and 2 Ohm low impedance operation
  • 100, 70, 50 and 35 V high impedance modes
  • RAM Audio advanced Power Control Management (PCM™)
  • Optional Dante™ Networking (AES67) and GPIO for third party interface
  • Subsonic filter
  • Signal link mini-dips configurable
  • Output level control in rear panel
  • Output mode configuration for high or low impedance with power limitation
  • Phoenix connectors for inputs and outputs
  • Up-side-down design to avoid fan dust accumulation
  • Temperature controlled, front to back cooling fan

Caractéristiques

Canaux
4
Puissance de sortie totale
2500 W
Puissance de sortie sur 2 Ohms (tous les canaux utilisés)
4 x 312 W
Puissance de sortie nominale à 2 Ohms (canal unique)
1 x 312 W
Puissance de sortie sur 2,67 Ohms (tous les canaux utilisés)
4 x 430 W
Puissance de sortie nominale à 2,67 Ohms (canal unique)
1 x 430 W
Puissance de sortie sur 4 Ohms (tous les canaux utilisés)
4 x 625 W
Puissance de sortie nominale à 4 Ohms (canal unique)
1 x 625 W
Puissance de sortie sur 8 Ohms (tous les canaux utilisés)
4 x 625 W
Puissance de sortie nominale à 8 Ohms (canal unique)
1 x 1250 W
Puissance de sortie (4 Ohms, mode Bridge)
2 x 625 W
Puissance de sortie (8 Ohms, mode Bridge)
2 x 1250 W
Hi - Z 100 V
4 x 625 W, 1 x 1250 W
Hi - Z 70 V
1 x 900 W, 4 x 625 W
Tension de sortie maximale
150 Vpeak
Intensité de sortie maxi
18 Apeak
Taux de distorsion (THD)
< 0.05 %
Crosstalk (20Hz - 1kHz)
> 70 dB
Amplification d'alimentation (Gain)
26 dB à 44 dB
Rapport signal/bruit
111 dB
Tension secteur
90 V AC - 265 V AC, 50 - 60 Hz
1/8 de la puissance nominale (@230V/4 ohm)
2.1 A
Circuits de protection
Surchauffe, Temporisation au démarrage, ICL™, protection contre les transitoires à l'allumage/extinction, Charges ouvertes ou inadaptées, DC, Mute à la mise sous tension, Court-circuit, RF, PCM ™, Surcharge du bloc secteur
Largeur
483 mm
Hauteur (mm)
89 mm
Profondeur
342 mm

Description

DUBHE 2.5Q

DUBHE Series are Hi efficiency 4-channels mid/high power level amplifiers dedicated to the installation market where they can be connected loads in both, low and high impedance, through their input and output Phoenix connectors and output level control potentiometers in the rear panel.

In the design it has been implemented the advanced RAM Audio Power Control Management to configure how to sharing the power between between the channels according to the user needs, having the possibility to obtain in just one channel the maximum power.

These amplifiers have many configuration possibilities such as bridge mode, subsonic filter, channel power limiter and signal link, among others, in order to satisfy the needs of any particular installation. These devices also can be equipped with a GPIO connection to interface with a third party control system. Optional Dante™ Networking (AES67) and GPIO connection to interface with a third party control system are available for DUBHE amplifiers.

With all these configurations DUBHE amplifiers can meet the power requirements of any installation from 300 up to 2500 W.

Téléchargements

Centre de téléchargement
Dans notre centre de téléchargement centralisé, vous trouverez tous les téléchargements concernant les marques, les produits et d’autres thèmes liés au service.

Vers le centre de téléchargement

Histoires

Logo EMAS

Nous sommes certifiés EMAS !

Copyright © 2026 Adam Hall GmbH. Tous droits réservés. | * Hors TVA.