ROADBUDDY 10 BPH 2 B6
Archives

ROADBUDDY 10 BPH 2 B6

Battery-Powered Bluetooth Speaker with Mixer, 2 Bodypack and 2 Headsets

Référence: LDRBUD10BPH2B6

Garantie: 24 mois

Code EAN: 4049521267536

Tarif différencié: 1

Unité: Pièce

Unité d'emballage: 1

Série:ROAD

Modèles:

Points forts du produit:

  • Battery-powered speaker solution
  • Integrated radio receiver 655 - 679 MHz
  • Bluetooth player with USB port and SD card slot
  • Class D power amplifier with 480 watts of peak power
  • 2 combo sockets for microphone or line inputs
  • 3.5 mm Aux input
  • Master section with 2-band EQ
  • Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
  • 2 Wireless microphones and IR-remote control included

Caractéristiques

Type de produit
Enceinte sur batterie
Diamètre boomer/médium
10 Inch
Diamètre Boomer
254 mm
Aimant boomer
Ferrite
Marque boomer
Sur mesure
Diamètre tweeter
1 Inch
Diamètre Tweeter
25.4 mm
Aimant tweeter
Ferrite
Marque tweeter
Sur mesure
Amplificateur
Classe D
Puissance (efficace)
120 W
Puissance (crête)
480 W
Réponse en fréquence
55 - 18000
Niveau de pression sonore (pour 1 W à 1 m)
96 dB
Niveau de pression sonore maximal
115 dB
Circuits de protection
Surtension, Court-circuit, surcharge
Réglages
Graves, Mic 2 Level, Echo, Volume général, CD / Tape IN Level, sélecteur AUX / MP3, Mic 1 Level, high
Indicateurs
Indicateur de charge / batterie, Power
Médias reconnus
Clé USB, Bluetooth, Carte SD
Formats reconnus
Fichiers MP3, Fichiers WMA, CD avec fichiers WAV
Contrôles lecteur médias
Play / Pause, Plage précédente, Plage suivante, Égaliseur, Repeat, Mode (Menu / Bluetooth /SD / USB), Stop
Indicateurs lecteur médias
Écran LCD multifonctions rétro-éclairé
Entrées ligne
1
Connecteurs d'entrée ligne
2 x XLR, 2 x Cinch (RCA), Jack 6,35 mm, Mini-Jack 3,5 mm
Entrées micro
2
Entrées micro
Jack 6,35 mm, 2 x XLR
Gamme de fréquences HF
655 - 679
Type de modulation
FM
Canaux
16
Réponse en Fréquence récepteur HF
50 Hz - 17000 Hz
Contrôles récepteur HF
Value Down, Niveau de Mute (Squelch), Value Up, Power / Volume, ASC (scan automatique)
Indicateurs récepteur HF
indicateur audio (LED), écran LED, RF (LED)
Connecteurs récepteur HF
nTNC pour antenne récepteur
Puissance d'Émission HF
10 MW
Poids d'émetteur ceinture
0.08 kg
Matériau d'émetteur ceinture
plastique ABS
Alimentation électrique
Bloc secteur
Tension secteur
100 V - 120 V / 60 Hz, 220 V - 240 V AC / 50 Hz
Batteries rechargeables
12 V / 5 Ah
Matériau coffret
Polypropylène
Finition coffret
Bass Reflex
Largeur
415 mm
Hauteur (mm)
525 mm
Profondeur
328 mm
Autres propriétés
Infrarouge pour lecteur de médias, Embase pour pied, diamètre 36 mm, poignée de transport, Poignée télescopique, Roulettes de transport

Description

ROADBUDDY 10 BPH 2 B6

The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has two UHF radio receiver who operates with 655 - 679 MHz range. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. Two handheld microphone with 10 mW output power(LDRBUD10HHD2B6), two headset microphones with belt pack (LDRBUD10BPH2B6) or as an alternative a handheld microphone and a headset microphone with belt pack (LDRBUD10HBH2B6) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

Vidéos sur cet article

Accessoires

Pièces détachées

Téléchargements

Centre de téléchargement
Dans notre centre de téléchargement centralisé, vous trouverez tous les téléchargements concernant les marques, les produits et d’autres thèmes liés au service.

Vers le centre de téléchargement

Histoires

Logo EMAS

Nous sommes certifiés EMAS !

Copyright © 2026 Adam Hall GmbH. Tous droits réservés. | * Hors TVA.