
Behind the scenes of the Value Added Service department

A sound pressure level of 70 dB is achieved by almost all loudspeakers on the market, regardless of their sound and build quality. For cost-efficient sound reinforcement in offices, however, high-impedance 100 V systems such as the DQOR Series are particularly suitable, as they require significantly less power than conventional solutions.
But why is that?
The 100 V technology was developed to transmit audio signals over long distances. The principle: the output voltage of the amplifier is raised to 100 V by special transformers. Another transformer sits in front of (or inside) the loudspeaker to turn the voltage down again.
Longer cable runs
Less cable = less material
Smaller cable cross-sections = more cost-effective
Less voltage loss = higher levels
Parallel connection of loudspeakers = easy subsequent addition of further loudspeakers
The LD Systems IMA 30 installation mixing amplifiers provide a power of 35 W at 100 V. The DQOR 3T 2-way installation speakers have different transformer taps down to 1.5 W, allowing a total of 23 DQOR 3T loudspeakers to be driven from a single IMA 30 (23 x 1.5 W = 34.5 W). As the loudspeakers are only used for background music, the 35 W total power of the IMA 30 is perfectly sufficient to cover a larger office area with 23 DQOR 3T. Furthermore, the IMA 30 is Energy Star certified and has a switchable auto-standby mode for even more energy savings when there is no audio signal.
#LDSystems #YourSoundOurMission #IntegratedSystems #EventTech #ExperienceEventTechnology
ld-systems.com/ima-serie
ld-systems.com/dqor-serie
ld-systems.com
adamhall.com