Locking 1/4" phone jack, D-size shell, nickel metal housing and silver contacts.
The 3 pole phone jack panel mount version provides stable and secure connections where accidental disconnect or shock and vibration may occur. It latches with standard A-gauge mono or stereo plugs. Plug locks-in automatically when mating and unlocks only by pressing red release tab. Standard D size front panel appearance. Selectable grounding options. Features & Benefits
- Securely locking chassis jack
- Mates with all mono and stereo plugs specified acc. EIA RS-453 (A-gauge)
- Closable grounding options: standard isolated, to get a sleeve/panel connection red isolator on lateral screw must be removed
- Dimensionally compatible with D Series (31 x 26 mm)
- Solder terminals
Product
- Connector Type Jack
- Gender female
Electrical
- Contact resistance < 6 mΩ (initial)
- Dielectric strength 1 kVdc
- Insulation resistance ≥ 1 GΩ
 500 V dc
- Rated current per contact 10 A
Mechanical
- Insertion force < 20 N
- Withdrawal force < 20 N
- Lifetime > 10000 mating cycles
- Wire size 1 mm²
- Wire size 18 AWG
- Wiring Solder contacts
- Locking device latch lock
- Mounting direction front
- Chassis shape D
Material
- Contact plating 2 µm Ag
- Contacts Bronze (CuBe2)
- Contacts Brass (CuZn37) (Ground)
- Insert Polyamide (PA 6.6 30 % GR)
- Shell Zinc diecast (ZnAl4Cu1)
- Shell plating Nickel
- Strain relief Polyacetal (POM)
Environmental
- Standard compliance EIA RS 453, IEC 60603-11
- Solderability Complies with IEC 68-2-20
- Temperature range -25 °C to +70 °C
|
