The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.
5 pole female cable connector with Nickel housing and silver contacts.
Features & Benefits
- Rugged zinc diecast shell, long lasting and durable
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
- Coloured rings and boots available for coding and marking
- UL recognized components
Product
- Connector Type XLR
- Gender female
Electrical
- Capacitance between contacts ≤ 7 pF
- Contact resistance ≤ 3 mΩ
- Dielectric strength 1,5 kVdc
- Insulation resistance > 2 GΩ (initial)
- Insulation resistance > 1 GΩ (after damp heat test)
- Rated current per contact 7,5 A
- Rated voltage 50 V
Mechanical
- Cable O.D. 3.5 - 8.0 mm
- Insertion force ≤ 20 N
- Withdrawal force ≤ 20 N
- Lifetime > 1000 mating cycles
- Wire size max. 1.0 mm²
- Wire size max. 18 AWG
- Wiring Solder contacts
- Locking device latch lock
Material
- Boot Polyuretan
- Bushing Polyamide (PA 6 15% GR)
- Contact plating 2 µm Ag
- Contacts Brass (CuZn39Pb3)
- Insert Polyamide (PA 6.6 30 % GR)
- Locking element St3K32 (latch) / Ck 67 (spring)
- Shell Zinc diecast (ZnAl4Cu1)
- Shell plating Nickel
- Strain relief Polyacetal (POM)
Environmental
- Approvals UL
- Flammability UL 94 HB
- Standard compliance IEC 61076-2-103
- Protection class IP 40
- Solderability Complies with IEC 68-2-20
- Temperature range -30 °C to +80 °C
|
